Belkin F1DW216C, F1DW116C Example of Daisy-Chain Configuration, Connecting the Daisy-Chain Cable

Page 17

INSTALLATION

Connecting the Daisy-Chain Cable:

5.Begin with BANK 00. Using the Daisy-Chain Cable (F1D9402-XX), connect one end to the “Daisy-Chain OUT” port on the first Switch.

6.Connect the other end of the Daisy-Chain Cable to the “Daisy-Chain IN” port of the next Switch.

Note: It does not matter which unit is the primary unit, only that they are connected OUT-to-IN or IN-to-OUT.

Adding Additional Units:

7.Continuing in the same manner, using the Daisy-Chain Cable (F1D9402-XX), connect “Daisy-Chain OUT” to “Daisy-Chain IN” on all subsequent units.

CAUTION: Never connect “Daisy-Chain IN” to “Daisy-Chain IN” or “Daisy-Chain OUT” to “Daisy Chain OUT”. This may produce unpredictable results.

Example of Daisy-Chain Configuration

Connecting the Computers:

8.Power on the Switches, in any order. You will see the port LEDs flash on and off and the seven-segment LEDs will light up, displaying a series of diagnostic codes, eventually stopping with the digits “XX”, where XX is its BANK address.

Note: If the Switches still do not enumerate with their corresponding BANK address, check that all Switches have the correct BANK address assigned to them and that all daisy-chain cables are connected properly.

15

Image 17

Contents OmniView Table of Contents Introduction Package Contents Overview Feature OverviewHot Keys Direct-Access Port SelectorsReprogrammable Hot Key Initiator Sequence AutoScanEquipment Requirements Product Specifications Front View with Fascia Flipped Down F1DW216C Front View of the Switch F1DW216CFront View with Fascia Flipped Down F1DW116C Back View of the KVM Switch F1DW216CPre-Configuration InstallationInstalling the Switch into a Server Rack Cable Length RecommendationsConnecting Computers to the Switch Standalone Switch InstallationInitial switch position for video compensation Connect the Console Connecting Multiple Switches Daisy-Chaining Example DIP Switch Configuration ChartInstallation Before you begin F1DE101A-AP Connecting the Daisy-Chain Cable Example of Daisy-Chain ConfigurationConnecting the Computers Adding Additional UnitsPowering Up the Systems Standalone Configuration Using Your SwitchSelecting a Computer Using Direct-Access Port Selectors Select Mode Daisy-Chain ConfigurationStatic Mode Idle Selecting a Computer Using Keyboard Hot Key Commands Using the MultiView Feature Using the AutoScan Function from the Front PanelAutoScan Mode Input and Navigation Features Using Your Switch Group Column MainComputer Name Column ID ColumnConsole Column Mouse ColumnSecurity Column Scan Column SetupSecurity User Columns 1, 2, 3, G PasswordsPassword Entry Fields Options Using Your Switch Using Your Switch Error Messages and Dialogs Installing the AutoUpdate application AutoUpdate Firmware Update UtilityConnecting the computer to the Switch Updating FirmwareUsing Your Switch Updating Devices via the Web Using Your Switch Updating your KVM Manually with a File from a Local Disk Using Your Switch Using Your Switch Completing a Standalone KVM Firmware Update Completing the Firmware UpdateTroubleshooting Glossary Glossary FCC Statement InformationP74342