Belkin F1DW216C, F1DW116C user manual AutoUpdate Firmware Update Utility, Updating Firmware

Page 35

USING YOUR SWITCH

The AutoUpdate Firmware Update Utility

Updating Firmware

The AutoUpdate application is designed to inspect your hardware and guide you through the process of updating the firmware (if necessary) on your Switch. AutoUpdate downloads are available by calling Belkin Tech Support at 310-898-1100, ext. 2263.

The administrator should perform the updates when the KVM Switch(es) is not in use. Each Switch will be power-cycled during the process, which may lead to loss of keyboard, or mouse functionality on some computers. The administrator should shut down any computers that he or she is not willing to physically reset, before beginning the update process.

To update the firmware, you will need the following items:

1.A computer running Windows XP, 2000, Me, or 98, with an available USB port.

2.A standard USB cable that connects between the Switch and the computer.

3.The Belkin AutoUpdate application.

4.An Internet connection for automatic installation.

Installing the AutoUpdate application:

1.Download and run the AutoUpdate application given to you by Belkin Tech Support.

2.Click the “Next” buttons, configuring file locations, icon preferences, etc., as desired, until the install is complete.

Connecting the computer to the Switch:

1.Power on the Switch.

2.Connect one end of the USB cable to the flash port on your Switch(es) (the USB “B” connector) and the other end to the computer’s USB port(s). You may need one or more USB hubs between the computer and the Switch if you intend to update multiple Switches simultaneously.

Note: Before you begin the update, the administrator should go into the Options page in IntelliView, press the “Display Version Numbers” button, and record the current version numbers; this will allow the administrator to confirm that the firmware was

updated correctly.

33

Page 34 Page 36
Image 35
Page 34 Page 36
Contents OmniView Table of Contents Introduction Package Contents Overview Feature OverviewAutoScan Direct-Access Port SelectorsHot Keys Reprogrammable Hot Key Initiator SequenceEquipment Requirements Product Specifications Front View with Fascia Flipped Down F1DW216C Front View of the Switch F1DW216CFront View with Fascia Flipped Down F1DW116C Back View of the KVM Switch F1DW216CCable Length Recommendations InstallationPre-Configuration Installing the Switch into a Server RackConnecting Computers to the Switch Standalone Switch InstallationInitial switch position for video compensation Connect the Console Connecting Multiple Switches Daisy-Chaining Example DIP Switch Configuration ChartInstallation Before you begin F1DE101A-AP Adding Additional Units Example of Daisy-Chain ConfigurationConnecting the Daisy-Chain Cable Connecting the ComputersPowering Up the Systems Standalone Configuration Using Your SwitchSelecting a Computer Using Direct-Access Port Selectors Select Mode Daisy-Chain ConfigurationStatic Mode Idle Selecting a Computer Using Keyboard Hot Key Commands Using the MultiView Feature Using the AutoScan Function from the Front PanelAutoScan Mode Input and Navigation Features Using Your Switch ID Column MainGroup Column Computer Name ColumnConsole Column Mouse ColumnSecurity Column Scan Column SetupSecurity User Columns 1, 2, 3, G PasswordsPassword Entry Fields Options Using Your Switch Using Your Switch Error Messages and Dialogs Updating Firmware AutoUpdate Firmware Update UtilityInstalling the AutoUpdate application Connecting the computer to the SwitchUsing Your Switch Updating Devices via the Web Using Your Switch Updating your KVM Manually with a File from a Local Disk Using Your Switch Using Your Switch Completing a Standalone KVM Firmware Update Completing the Firmware UpdateTroubleshooting Glossary Glossary FCC Statement InformationP74342
Top Page Image Contents