Fujitsu XG700 manual Installation Procedure, Installation requirements, Space requirements

2-2Installation Procedure

This chapter describes the installation requirements and installation procedure.

2-2-1 Installation requirements

Before installing the XG700, read " For Safe Use of the XG700 (P.2)" and comply with the installation requirements described below.

Space requirements

When installing the XG700, a certain amount of installation space is necessary.	2
When installing the rack, the indicated space (800mm of both the front and rear of the rack)
should be reserved as a service area.

The following figures indicate examples of a 540mm (W) X 850mm (D) 19-inch rack and a 700mm (W) X 950mm (D) 19 inch rack.

When installing in any other 19-inch rack, refer to the user guide provided with the rack.

[540mm (W) 850mm (D) 19-inch rack]

(Unit: mm)

Front	Service area	Rack
	(Front)	(Top)

800 850

[700mm (W) 950mm (D) 19-inch rack]

(Unit: mm)

Service area

(Rear)

800

540

Front

Service area

(Front)

Rack

(Top)

Service area

(Rear)

700

800

950

800

CAUTION

The XG700 may be installed in any rack with an internal depth of between 630mm and 750mm.

Installation Procedure

21