2-3 Cable Connection
This section explains how to connect the cables and power cords.
2-3-1 Connecting cables
The cables need to be connected to the XG700 Xenpak modules.
1. Connect the cables to the XG700.
Connect the cables to the Xenpak modules (Port 1 - Port 12) on the front of XG700.
|
| Console |
| Dump | Power Alarm Status |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | |
| Port 1 |
| Port 3 |
| Port 5 |
| Port 7 | Port 8 | Port 9 | Port 11 | ||
|
| Port 2 |
| Port 4 | Port 6 |
|
| Port 10 |
| Port 12 |
Attention
It is necessary that the connectors be fixed in the correct position, in order to protect the connector interface against external influences.
2
Cable Connection
27