![XG700 is not used properly.](/images/new-backgrounds/108820/1088209x1.webp)
This symbol indicates the possibility of minor or moderate personal injury, as CAUTION well as damage to the XG700 and/or to other users and their property, if the
XG700 is not used properly.
Category | Caution | |
|
| |
Danger of device | Do not place the XG700 on its side or stack up multiple XG700s. Doing so may damage the XG700. | |
damage |
| |
Do not install the XG700 in an unstable place (such as on a slanted surface or a place subjected to | ||
| ||
| vibrations). Doing so may damage the XG700. | |
|
| |
| Do not place any objects or perform any work on the XG700. Doing so may damage the XG700. | |
|
| |
| Install the XG700 inside a building. Using the XG700 outside may damage it. | |
|
| |
| Do not use the XG700 in areas of extremely high temperature, low temperature, or a area where the | |
| temperature goes up and down suddenly. Installing the XG700 in such areas may damage it. | |
|
| |
| Do not expose the XG700 to seawater. Installing the XG700 in such areas may damage it. | |
|
| |
| Do not use the XG700 in a place subjected to shock or vibrations. Using the XG700 in such a place may | |
| damage it. | |
|
| |
| Do not use the XG700 in a place where chemicals are being sprayed or may otherwise come in contact | |
| with it. Using the XG700 in such a place may damage it. | |
|
| |
| Do not use the XG700 near objects which generate strong magnetic fields, such as microwave ovens. | |
| Using the XG700 in such place may damage it. | |
|
| |
| Do not use the XG700 with foreign objects (liquids and/or pieces of metal) inside it. Using the XG700 in | |
| such a condition may damage it. | |
|
| |
| When moving the XG700, be sure to remove the power plug from the outlet first. No doing so may dam- | |
| age it. | |
|
| |
Danger of | Do not use the XG700 near a radio or a TV. | |
electromagnetic | Doing so can interfere with the radio and TV reception. | |
interference |
| |
|
| |
Danger of | To avoid an electric shock, do not open the cover unless you are a maintenance engineer. | |
electric shock | When performing maintenance on the XG700, be sure to remove the power plug from the outlet first. | |
|
| |
Danger when | Only use the XG700 if the temperature inside the rack is 40°C or less. Ignoring this may damage the | |
rackmounting | XG700 (P.22). | |
|
| |
| Ensure that the rack is sufficiently ventilated and that excess heat is properly exhausted (P.22). | |
|
| |
| Check that the configuration of devices in the rack does not overload the power supply (P.22). | |
|
| |
| To ensure the stability of the rack, fix it to the wall or floor as appropriate (P.22). | |
|
| |
| Do not install the XG700 in a rack if it would make it unstable (P.22). | |
|
| |
| Check that all units installed in the rack are correctly connected to a grounded power source (P.22). | |
|
| |
| When installing and removing the XG700 from a rack, be sure to hold it by both sides. At least two peo- | |
| ple should work together.(P.23)(P.26) | |
|
| |
Danger when | When cleaning the XG700, only use a soft cloth, and wipe it gently. | |
cleaning |
| |
|
|
4
For Safe Use of the XG700