Belkin P73162-A, F5U104 user manual Windows 2000 Instructions, Hardware Installation under Windows

P73162-A-F5U104-man.qxd 8/15/01 2:40 PM Page 16

8. Windows 2000 Instructions

Installation and setup of the Belkin USB Direct Connect takes three main steps:

•Hardware installation

•Adding the Direct Connect to the system

•Configuring the Direct Connect network settings Follow the steps in this section to set up your Direct Connect.

Hardware Installation under Windows 2000

1.Insert the installation disk into the computer and, with the supplied cable, attach the Direct Connect to the computer. The “Found New Hardware Wizard” will start. Click Next”.

2.In the next window, select “Search for a suitable driver for my device (recommended)” and click “Next”.

3.In the next window, select “Specify a location” and click “Next”.

4.In the next window, under “Copy manufacturer’s files from:”, type: [drive letter]:\win2000, where [drive letter] is the letter of your CD-ROM drive. See the illustration below. Click “Next”.

16