Troubleshooting

The ExpressCard and devices connected to the computer do not work properly.

Please do the following:

1.Check that all the cables you are using are the correct types, and that they are all securely connected.

2.Make sure all devices are powered on and connected to the proper power supply and source.

3.Reconnect daisy-chained devices you may have disconnected for installation. If reconnecting does not clear up the problem, restart your computer.

4.Make sure you have properly installed the ExpressCard.

The computer did not detect the ExpressCard.

1.Make sure that the ExpressCard is correctly plugged into the ExpressCard 34-/54mm slot; if not, plug in it securely.

2.If the ExpressCard is plugged in correctly, see if its gold connectors are clean; if not, clean the connector surface.

3.Follow the procedure on page 5, titled “Verifying Proper Installation”. If the ExpressCard designation “Texas Instruments OHCI Compliant IEEE 1394 Host Controller” does not appear in the Device Manager, update your computer BIOS to the latest version (contact your computer manufacturer for

5028_F5U505_man.indd 6

11/4/05 1:10:54 P