Finding a passage within a track

1Press and hold down on TUNING S / T. ➜ The disc is played at high speed.

2When you recognize the passage you want, release TUNING S / T.

➜ Normal playback continues.

Selecting a desired album/track (MP3 disc only)

To select a desired album

●Press ALBUM/PRESET 4 / 3 repeatedly.

To select a desired track

●Press TUNING S / T repeatedly.

You can select and change the various play modes before or during playback.

1Press REPEAT and SHUFFLE on the remote control to select :

➜REP – to repeat the current track.

➜REP ALL – to repeat the entire disc/ programme.

➜SHUF – tracks of the entire disc/ programme are played in random order.

2To return to normal playback, press REPEAT and SHUFFLE until the various SHUFFLE/ REPEAT modes are no longer displayed.

Note:

– If Shuffle is activated on a MP3-CD, all titles stored in the disc will be played in random order.

Programming tracks is possible when playback is stopped. Up to 32 tracks can be stored in the memory in any order.

1Press PROG on the remote control to enter the programming mode.

2Press TUNING S / T repeatedly to select your desired track number.

●For MP3 disc, press ALBUM/PRESET 4 / 3 and TUNING S / T to select the desired album and track for programming.

3Press PROG to confirm the track number to be stored.

4Repeat steps 2-3to select and store all desired tracks.

5To start playback of your disc programme, press Ç followed byÉÅ.

●If you attempt to programme more than 32 tracks, “PROG FULL” will appear on the display. In this case :

➜The system will exit programming mode automatically.

➜Pressing Ç button will erase all the programmed tracks.

➜Pressing ÉÅ button will start playback the programmed tracks.

In stop mode, press and hold PROG until the display shows all your stored track numbers in sequence.

●Press Ç once when playback is stopped or twice during playback.

➜ PROG disappears and “CLEAR” is displayed.