Philips PDCC-JW-0817 External Sources, Using a non-USB device, Using a USB mass storage device

Page 22

External Sources

English

Using a non-USB device

1Connect the audio out terminals of the external equipment (TV,VCR, Laser Disc player, DVD player or CD Recorder) to the LINE-INterminal of your system.

2Press SOURCE repeatedly (or AUX on the remote control) to select external equipment.

Notes:

All the sound control features (DSC or DBB, for example) are available for selection.

Refer to the operating instructions for the connected equipment for details.

Supported Music type:

a)This device only supports unprotected music with the following file extension:

.mp3

.wma

b)Music bought from on-line music stores are not supported because they are secured by Digital Rights Management protection (DRM).

c)File name extensions that end with the following are not supported:

.wav; .m4a; .m4p; mp4; .aac and etc.

No Direct connection can be made from Computer USB port to the micro system even you have either or both mp3 or wma files in your computer.

Using a USB mass storage device

By connecting a USB mass storage device to the Hi-Fi system, you can enjoy the device's stored music through the powerful speakers of Hi-Fi system.

Playing a USB mass storage device Compatible USB mass storage devices

With the Hi-Fi system, you can use:

USB flash memory (USB 2.0 or USB1.1)

USB flash players (USB 2.0 or USB1.1)

memory cards (requires an additional card reader to work with this Hi-Fi system)

Notes:

In some USB flash players (or memory devices), the stored contents are recorded using copyright protection technology. Such protected contents will be unplayable on any other devices (such as this Hi-Fi system).

Compatibility of the USB connection on this micro system:

a)This micro system supports most USB Mass storage devices (MSD) that are compliant to the USB MSD standards.

i)Most common Mass storage class devices are flash drives, memory sticks, jump drives and etc.

ii)If you see a "Disc Drive" show up on your computer after you plugged the mass storage device into your computer, most likely it is MSD compliant and it will work with this micro system.

b)If your Mass storage device required a battery/ power source. Please make sure you have a fresh battery in it or charge the USB device first and then plug it into the micro system again.

Supported formats:

USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 bytes)

MP3 bit rate (data rate): 32-320 Kbps and variable bit rate

WMA v9 or earlier

Directory nesting up to a maximum of 8 levels

Number of albums/ folders: maximum 99

Number of tracks/titles: maximum 500

ID3 tag v2.0 or later

File name in Unicode UTF8 (maximum length: 128 bytes)

The system will not play or support the following:

Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display.

Non-supported file formats are skipped.This means that e.g.: Word documents .doc or MP3 files with extension .dlf are ignored and will not be played.

AAC, WAV, PCM audio files

DRM protected WMA files

WMA files in Lossless format

How to transfer music files from PC to a USB mass storage device

By dragging and dropping music files, you can easily transfer your favorite music from PC to a USB mass storage device.

For the flash player, you can also use its music management software for the music transfer.

However, those WMA files may be unplayable for compatibility reasons.

22

Image 22
Contents Micro Hi-Fi System Mains plug How to connect a plugImportant notes for users in the U.K Copyright in the U.KPage Dichiarazione DI CONFORMITA’ Typeskilt finnes på apparatens undersideEnglish 102Italiano Bokmål Dansk Contents General Information Supplied accessoriesSafety Information Environmental InformationTo establish a safe volume level Hearing SafetyListen at a moderate volume Listen for reasonable periods of timeRear connections PowerPreparations FM/DAB antenna connectionOptional connection Connecting a non-USB deviceConnecting a USB device or memory Card Insert the USB devices USB plug into the socket on the setPull out the plastic protective sheet Before using the remote controlReplacing battery lithium CR2025 into the remote control Then select the desired function for example ÉÅ , à, áControls Controls on the set illustrations onRemote control ¡ Sleep DisplayVOL + £ MuteBasic Functions Playing a disc CD/MP3-CD OperationsDiscs for playback Text displayDifferent play modes Shuffle and Repeat Finding a passage within a trackSelecting a desired album/track MP3 disc only Reviewing the programmeManual tuning Tuning to DAB for the first timeRe-tuning DAB ReceptionDAB information display Tuning to preset DAB stationsMenu operation Programming DAB stations Tuner Tuning to radio stationsProgramming radio stations Automatic clock setting via RDS Switching through RDS informationStation name are displayed External Sources Using a non-USB deviceUsing a USB mass storage device System will not play or support the followingTitle RootAlbum Setting clock Clock/TimerSetting the timer Sleep Timer/SleepActivating and deactivating Icon disappearsSpecifications Cleaning Discs MaintenanceCleaning the Cabinet Cleaning the disc lensSolution TroubleshootingProblem Check if the stripped speaker wire is clampedReplace the battery Meet Philips at the Internet English Deutsch Italiano Bokmål Dansk