CONNECTING AND CONFIGURING YOUR CABLE/DSL GATEWAY ROUTER
3.4Connect the new network cable from the back of the computer to one of the ports labeled
NOTE: It does not matter which numbered port you choose.
3.5Turn on your cable or DSL modem by reconnecting the power supply to the modem.
3.6Before plugging the power cord into the Router, plug the cord into the wall, then plug the cord into the Router’s power jack.
3.7Verify that your modem is connected to the Router by checking the lights on the front of the Router. The green light labeled “WAN” should be ON if your modem is connected correctly to the Router. If it is not, recheck
your connections.
Computer that was originally connected to the cable or DSL modem
To power adapter
New network cable (to computer)
Cable or | Existing network cable |
DSL modem | |
| (that came with modem) |
3.8Verify that your computer is connected properly to the Router by checking the lights labeled “LAN 1,2,3,4”. The light which corresponds to the numbered port that you connected your computer to should be ON if your computer is connected properly.
12