Belkin F5D7233 user manual Setting WPA-PSK no server

Using the Web-Based Advanced User Interface

Setting WPA-PSK (no server)

1.From the “Security Mode” drop-down menu, select “WPA-PSK (no server)”.

2.For “Encryption Technique”, select “TKIP” or “AES”. This setting will have to be identical on the clients that you set up.

3.Enter your pre-shared key. This can contain eight to 63 characters (letters, numbers, and/or symbols). This same key must be used on all of the clients that you set up. For example, your PSK might be something like: “Smith family network key”.

4.Click “Apply Changes”. You must now configure all clients to match these settings.

Configuring your Belkin Wireless G Cards to Use Security Features Please N ote: This section will provide you with information on how to configure your Belkin Wireless G Cards to use security features.

At this point, you should already have your Router or access point set up to use WPA or WEP. To establish a wireless connection, you will need to set up your Wireless Notebook Card and Wireless Desktop Card to use the same security settings.

46