Belkin N1 user manual Information, Federal Communications Commission Notice

Page 110

Information

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR

ELECTROMAGNETIC COMPATIBILITY

We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product,

F5D8232-4

to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Exposure to Radio Frequency Radiation.

The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized.

When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the distance between the equipment and the receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

106

Image 110
Contents Page Page Table of Contents Page Advantages of a Wireless Network IntroductionRevolutionary N1 Wireless Technology with Mimo N1 Mimo Placement of your N1 VisionImportant Factors for Placement and Setup N1 Vision Avoid Obstacles and InterferenceChoose the Quietest Channel for your Wireless Network Cordless PhonesSecure Connections, VPNs, and AOL US 877-736-5771 800-223-5546 ext 310-898-1100 extProduct Overview Belkin Troubleshooting Assistant CD Integrated 10/100 4-Port SwitchBuilt-In Dynamic Host Configuration Protocol Dhcp Universal Plug and Play UPnPIntegrated N1 Wireless Access Point MAC Address FilteringSystem Requirements Package ContentsKnowing your N1 Vision Assistant Software System RequirementsHardware Characteristics Knowing your N1 VisionMenu Button Way KeypadOK Button Knowing your N1 Vision Resetting the N1 Vision Connections to Wired Computers Gray PortsReset Button Ii. Restoring the Factory DefaultsEthernet USB Connecting and Configuring your N1 VisionModem Requirements Hardware Connections Follow the Quick Installation Guide QIG Connecting and Configuring your N1 Vision Options Information Screens Interactive DisplayStartup Screen Network StatusInternet Connection N1 Vision Router Wireless StateWired Computers Modem ConnectionBroadband Download Wireless ComputersSecurity SpeedometerUsage Past 24 Hours Guest Access Status Date & TimeConnections/Speed Wireless Security Menu ScreenPower Save Help and TipsTroubleshooting Assistant CD Confirmation Screen Progress ScreenChecking Settings Configuring the N1 Vision Requesting Internet Account Info if neededTroubleshooting Optional Assistance Connecting Other Computers Alternate Setup Method Understanding the Web-Based Advanced User Interface Logging into the N1 VisionLogging out of the N1 Vision Quick-Navigation Links Internet-Status IndicatorLogin/Logout Button Home ButtonInternet Settings LAN SettingsFeatures Help ButtonAlternate Setup Method Setting your Connection Type Host Name Change WAN MAC AddressISP Gateway Address IP AddressSubnet Mask My ISP Provides More Than One Static IP AddressSetting your ISP Connection Type to PPPoE User Name PasswordService Name MTUPptp Account Pptp PasswordService IP Address My IP AddressMy Subnet Mask Connection ID optionalSelect your State User Decide Login Server Manually Setting Custom Domain Name Server DNS SettingsEntering a Specific MAC Address Configuring your WAN Media Access Controller MAC AddressCloning your MAC Address Viewing the LAN Settings Using the Web-Based Advanced User Interface Changing LAN SettingsLease Time Dhcp ServerIP Pool Local Domain NameConfiguring the Wireless Network Settings Viewing the Dhcp Client ListUsing the Web-Based Advanced User Interface Changing the Wireless Network Name Ssid802.11b+g+n Changing the Wireless ChannelUsing the Wireless Mode Switch Off20MHz/40MHz Auto Using the Bandwidth Switch20MHz only Using the Broadcast Ssid Feature Protected Mode Switch Changing the Wireless Security SettingsUsing Wi-Fi Protected Setup Using the Web-Based Advanced User Interface WPA2 Requirements Setting WPA/WPA2-Personal PSK Setting WPA Security Setting Guest Access Setting WEP Encryption Using a Hexadecimal Key Using the Access Point Mode Setting MAC Address Control Setting up an Allow Access List Setting up a Deny Access ListConfiguring the Firewall Choosing an Application Configuring Internal Forwarding SettingsManually Entering Settings into the Virtual Server Setting Client IP Filters Enabling the Demilitarized Zone DMZ Using Dynamic DNS Setting up the N1 Vision’s Dynamic DNS Update ClientUtilities Blocking an Icmp PingRestarting the Router to Restore Normal Operation Restarting the RouterRestoring Factory Default Settings Saving a Current Configuration Restoring a Previous Configuration Using the Web-Based Advanced User Interface Updating the Firmware Checking for a New Version of FirmwareDownloading a New Version of Firmware Updating the N1 Vision’s Firmware Using the Web-Based Advanced User Interface Changing the Login Time-Out Setting Changing System SettingsSetting or Changing the Administrator Password Setting the Time and Time Zone Enabling Remote ManagementEnabling/Disabling NAT Network Address Translation Enabling/Disabling Auto Firmware Update Enabling/Disabling UPnPManually Configuring Network Settings Manually Configuring Network Settings in Mac OS up toManually Configuring Network Settings Manually Configuring Network Settings in Mac OSSection Manually Configuring Network Settings Manually Configuring Network Adapters in Windows 98SE or Me Recommended Web Browser Settings Microsoft Internet Explorer 4.0 or HigherNetscape Navigator 4.0 or Higher Assistant software cannot find my N1 Vision TroubleshootingAssistant CD does not automatically start Troubleshooting Troubleshooting Section Troubleshooting Can’t connect to the Internet wirelessly Troubleshooting Troubleshooting For example C3030FAF4BB2C3D44BC3D4E7E4 = 128-bit key Click OK, and then Apply to save the settings Do Belkin products support WPA? 101 XP WPA 103 Wireless Comparison Chart Technical Support Information Federal Communications Commission NoticeModifications Canada-Industry Canada ICHow to get service What will we do to correct problems?What is not covered by this warranty? What the period of coverage isHow state law relates to the warranty Belkin Tech Support Belkin International, Inc
Related manuals
Manual 128 pages 45.01 Kb Manual 114 pages 44.6 Kb Manual 2 pages 48.31 Kb

N1 specifications

The Belkin N1 is a robust wireless router designed to provide high-speed internet connectivity, ideal for both home and small office environments. This device is well-suited for streaming, gaming, and heavy internet usage thanks to its advanced technologies and features.

One of the standout characteristics of the Belkin N1 is its support for N technology, which offers significantly faster wireless speeds compared to the previous G technology. The Belkin N1 boasts a coverage area that can extend up to 3 times further than standard routers, allowing for seamless connectivity in larger homes or offices. Utilizing MIMO (Multiple Input Multiple Output) technology, the Belkin N1 can transmit multiple data streams simultaneously, improving overall performance and reducing dead zones.

The router operates on dual bands, providing both 2.4 GHz and 5 GHz frequencies. This dual-band capability allows users to choose the best frequency for their devices. For instance, the 2.4 GHz band is ideal for basic browsing and compatible devices, while the 5 GHz band offers less interference and is perfect for high-bandwidth applications like HD video streaming and online gaming.

The Belkin N1 is equipped with several advanced security protocols, including WPA and WPA2 encryption, ensuring that users' data is protected from unauthorized access. Additionally, it features a robust firewall to prevent potential threats, offering peace of mind to users concerned about online security.

Another notable feature of the Belkin N1 is its user-friendly setup process. The router comes with a straightforward installation CD, guiding users through the setup in mere minutes. For those who prefer more control, the Belkin N1 also provides an intuitive web interface, allowing users to customize settings to fit their specific needs.

Furthermore, the Belkin N1 includes several Ethernet ports, enabling direct wired connections for devices that may require stable connections, such as gaming consoles or desktop computers. This ensures that users can enjoy optimal performance without compromising on speed.

In summary, the Belkin N1 is a feature-rich wireless router that excels in speed, coverage, and security. Its dual-band support, MIMO technology, and user-friendly setup make it an excellent choice for anyone looking to enhance their home networking experience. Whether for streaming, gaming, or everyday browsing, the Belkin N1 is designed to meet the demands of modern internet users, making it a valuable addition to any digital environment.