Belkin N1 user manual Cordless Phones, Choose the Quietest Channel for your Wireless Network

Page 8

Introduction

3.Cordless Phones

If the performance of your wireless network is impaired after attending to the above issues, and you have a cordless phone:

•Try moving cordless phones away from your N1 Vision and your wireless-enabled computers.

•Unplug and remove the battery from any cordless phone that operates on the 2.4GHz band (check manufacturer’s information). If this fixes the problem, your phone may be interfering.

•If your phone supports channel selection, change the channel on the phone to the farthest channel from your wireless network. For example, change the phone to channel 1 and move your N1 Vision to channel 11. See your phone’s user manual for detailed instructions.

•If necessary, consider switching to a 900MHz or 5GHz cordless phone.

4.Choose the “Quietest” Channel for your Wireless Network

In locations where homes or offices are close together, such as apartment buildings or office complexes, there may be wireless networks nearby that can conflict with yours.

Use the Site Survey capabilities found in the Wireless Utility of your wireless adapter to locate any other wireless networks that are available (see your wireless adapter’s user manual), and move your N1 Vision and computers to a channel as far away from other networks as possible.

•Experiment with more than one of the available channels, in order to find the clearest connection and avoid interference from neighboring cordless phones or other wireless devices.

•For Belkin wireless networking products, use the detailed Site Survey and wireless channel information included with your wireless network card. See your network card’s user guide for more information.

These guidelines should allow you to cover the maximum possible area with your N1 Vision. Should you need to cover an even wider area, we suggest the Belkin Wireless Range Extender/Access Point.

4

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Page Page Table of Contents Page Advantages of a Wireless Network IntroductionRevolutionary N1 Wireless Technology with Mimo N1 Mimo Placement of your N1 VisionImportant Factors for Placement and Setup N1 Vision Avoid Obstacles and InterferenceChoose the Quietest Channel for your Wireless Network Cordless PhonesSecure Connections, VPNs, and AOL US 877-736-5771 800-223-5546 ext 310-898-1100 extProduct Overview Integrated 10/100 4-Port Switch Built-In Dynamic Host Configuration Protocol DhcpBelkin Troubleshooting Assistant CD Universal Plug and Play UPnPIntegrated N1 Wireless Access Point MAC Address FilteringPackage Contents Knowing your N1 VisionSystem Requirements Assistant Software System RequirementsHardware Characteristics Knowing your N1 VisionMenu Button Way KeypadOK Button Knowing your N1 Vision Connections to Wired Computers Gray Ports Reset ButtonResetting the N1 Vision Ii. Restoring the Factory DefaultsEthernet USB Connecting and Configuring your N1 VisionModem Requirements Hardware Connections Follow the Quick Installation Guide QIG Connecting and Configuring your N1 Vision Options Interactive Display Startup ScreenInformation Screens Network StatusN1 Vision Router Wireless State Wired ComputersInternet Connection Modem ConnectionWireless Computers SecurityBroadband Download SpeedometerUsage Past 24 Hours Guest Access Status Date & TimeConnections/Speed Wireless Security Menu ScreenPower Save Help and TipsTroubleshooting Assistant CD Confirmation Screen Progress ScreenChecking Settings Configuring the N1 Vision Requesting Internet Account Info if neededTroubleshooting Optional Assistance Connecting Other Computers Alternate Setup Method Understanding the Web-Based Advanced User Interface Logging into the N1 VisionLogging out of the N1 Vision Internet-Status Indicator Login/Logout ButtonQuick-Navigation Links Home ButtonLAN Settings FeaturesInternet Settings Help ButtonAlternate Setup Method Setting your Connection Type Host Name Change WAN MAC AddressIP Address Subnet MaskISP Gateway Address My ISP Provides More Than One Static IP AddressSetting your ISP Connection Type to PPPoE Password Service NameUser Name MTUPptp Password Service IP AddressPptp Account My IP AddressMy Subnet Mask Connection ID optionalSelect your State User Decide Login Server Manually Setting Custom Domain Name Server DNS SettingsEntering a Specific MAC Address Configuring your WAN Media Access Controller MAC AddressCloning your MAC Address Viewing the LAN Settings Using the Web-Based Advanced User Interface Changing LAN SettingsDhcp Server IP PoolLease Time Local Domain NameConfiguring the Wireless Network Settings Viewing the Dhcp Client ListUsing the Web-Based Advanced User Interface Changing the Wireless Network Name SsidChanging the Wireless Channel Using the Wireless Mode Switch802.11b+g+n Off20MHz/40MHz Auto Using the Bandwidth Switch20MHz only Using the Broadcast Ssid Feature Protected Mode Switch Changing the Wireless Security SettingsUsing Wi-Fi Protected Setup Using the Web-Based Advanced User Interface WPA2 Requirements Setting WPA/WPA2-Personal PSK Setting WPA Security Setting Guest Access Setting WEP Encryption Using a Hexadecimal Key Using the Access Point Mode Setting MAC Address Control Setting up an Allow Access List Setting up a Deny Access ListConfiguring the Firewall Choosing an Application Configuring Internal Forwarding SettingsManually Entering Settings into the Virtual Server Setting Client IP Filters Enabling the Demilitarized Zone DMZ Using Dynamic DNS Setting up the N1 Vision’s Dynamic DNS Update ClientUtilities Blocking an Icmp PingRestarting the Router to Restore Normal Operation Restarting the RouterRestoring Factory Default Settings Saving a Current Configuration Restoring a Previous Configuration Using the Web-Based Advanced User Interface Updating the Firmware Checking for a New Version of FirmwareDownloading a New Version of Firmware Updating the N1 Vision’s Firmware Using the Web-Based Advanced User Interface Changing the Login Time-Out Setting Changing System SettingsSetting or Changing the Administrator Password Setting the Time and Time Zone Enabling Remote ManagementEnabling/Disabling NAT Network Address Translation Enabling/Disabling Auto Firmware Update Enabling/Disabling UPnPManually Configuring Network Settings Manually Configuring Network Settings in Mac OS up toManually Configuring Network Settings Manually Configuring Network Settings in Mac OSSection Manually Configuring Network Settings Manually Configuring Network Adapters in Windows 98SE or Me Recommended Web Browser Settings Microsoft Internet Explorer 4.0 or HigherNetscape Navigator 4.0 or Higher Assistant software cannot find my N1 Vision TroubleshootingAssistant CD does not automatically start Troubleshooting Troubleshooting Section Troubleshooting Can’t connect to the Internet wirelessly Troubleshooting Troubleshooting For example C3030FAF4BB2C3D44BC3D4E7E4 = 128-bit key Click OK, and then Apply to save the settings Do Belkin products support WPA? 101 XP WPA 103 Wireless Comparison Chart Technical Support Information Federal Communications Commission NoticeModifications Canada-Industry Canada ICWhat will we do to correct problems? What is not covered by this warranty?How to get service What the period of coverage isHow state law relates to the warranty Belkin Tech Support Belkin International, Inc
Related manuals
Manual 128 pages 45.01 Kb Manual 114 pages 44.6 Kb Manual 2 pages 48.31 Kb

N1 specifications

The Belkin N1 is a robust wireless router designed to provide high-speed internet connectivity, ideal for both home and small office environments. This device is well-suited for streaming, gaming, and heavy internet usage thanks to its advanced technologies and features.

One of the standout characteristics of the Belkin N1 is its support for N technology, which offers significantly faster wireless speeds compared to the previous G technology. The Belkin N1 boasts a coverage area that can extend up to 3 times further than standard routers, allowing for seamless connectivity in larger homes or offices. Utilizing MIMO (Multiple Input Multiple Output) technology, the Belkin N1 can transmit multiple data streams simultaneously, improving overall performance and reducing dead zones.

The router operates on dual bands, providing both 2.4 GHz and 5 GHz frequencies. This dual-band capability allows users to choose the best frequency for their devices. For instance, the 2.4 GHz band is ideal for basic browsing and compatible devices, while the 5 GHz band offers less interference and is perfect for high-bandwidth applications like HD video streaming and online gaming.

The Belkin N1 is equipped with several advanced security protocols, including WPA and WPA2 encryption, ensuring that users' data is protected from unauthorized access. Additionally, it features a robust firewall to prevent potential threats, offering peace of mind to users concerned about online security.

Another notable feature of the Belkin N1 is its user-friendly setup process. The router comes with a straightforward installation CD, guiding users through the setup in mere minutes. For those who prefer more control, the Belkin N1 also provides an intuitive web interface, allowing users to customize settings to fit their specific needs.

Furthermore, the Belkin N1 includes several Ethernet ports, enabling direct wired connections for devices that may require stable connections, such as gaming consoles or desktop computers. This ensures that users can enjoy optimal performance without compromising on speed.

In summary, the Belkin N1 is a feature-rich wireless router that excels in speed, coverage, and security. Its dual-band support, MIMO technology, and user-friendly setup make it an excellent choice for anyone looking to enhance their home networking experience. Whether for streaming, gaming, or everyday browsing, the Belkin N1 is designed to meet the demands of modern internet users, making it a valuable addition to any digital environment.
Top Page Image Contents