Belkin F6D4630-4 user manual Manually Configuring Network Adapters in Windows 98 or Me

Manually Configuring Network Settings

Table of Contents		sections	1	2	3		4	5	6	7	8	9	10
Manually Configuring Network Adapters in Windows 98 or Me
1. Right-click on “My Network Neighborhood” and select “Properties”							3.	If “Specify and IP address” is selected, your Router will need
	from the drop-down menu.							to be set up for a static IP connection type. Write the address
2. Select “TCP/IP -> settings” for your installed network adapter. You								information in the table below. You will need to enter this
								information into the Router.
	will see the following window.						4.
								Write the IP address and subnet mask from the “IP Address”
								tab (3).
(1)						(3)	5.	Click the “Gateway” tab (2). Write the gateway address down in
(2)
								the chart.
							6.	Click the “DNS Configuration” tab (1). Write the DNS address(es)
								in the chart.

7. If not already selected, select “Obtain IP address automatically” in the “IP Address” tab. Click “OK”.

Restart the computer. When the computer restarts, your network adapter(s) are now configured for use with the Router.

Enhanced Wireless Modem Router 76