Belkin F5D8631-4 user manual Replacing an Existing Modem or Modem Router

Connecting and Configuring your Modem Router

Replacing an Existing Modem or Modem Router

1

computer

modem router

modem

Follow these steps if you currently have a modem or a modem router that you will be replacing with your new Modem Router

A.Unpack your new Modem Router from the box and place it next to your old modem. Raise the Modem Router’s antennas. Unplug old modem’s power cord.

B.Locate the cable that connects your old modem to your computer. Unplug that cable from your old modem, and plug it into any yellow port labeled “to Wired Computers” on the back of your new Modem Router.

C.Locate the cable that connects your old modem to the ADSL wall jack. Unplug it from your old modem and then connect it to the gray port labeled “to ADSL” on the back of your Modem Router.

D.Plug your Modem Router’s power supply into the black port labeled “Power” on the back of your Modem Router.

E.Wait 20 seconds for the Modem Router to start up. Look at the display on the front of the Modem Router. Make sure the “Wired” and “Modem-Router” icons are lit up in blue. If they are not, recheck your connections.

2

3

4

5

6

7

8

9

10

section

16