GeTTInG TO KnOW YOUR ROUTeR
back Panel
(a)
(b)
(c)
(d)
(e)
a) Modem (Wan) Connector
Connect your modem to this port using an Ethernet cable .
b) Wired (lan) Connectors
Connect computers and other wired network devices to these ports using Ethernet cables .
C) Usb Port
USB printers, disks, and other USB devices plugged into this port will be shared on your network . Each USB port has a light that indicates its status .
Off: No USB device is connected or the attached USB device is not in use .
blinking: Please wait to unplug the device until the light turns off .
On: The USB device is connected and being shared on your network .
D) Reset button
This button is used to restart your Router in rare cases when it functions incorrectly . Resetting the Router will preserve your settings . This button may also be used to restore the factory default settings . Please see the Troubleshooting section
for more information .
e) Power Connector
Connect the included power supply to this jack .
17