Belkin PM01218ea F5D7634-4 user manual Manually Configuring your Router

Manually Configuring your Router

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

6.You will see the Router’s user interface in the browser window. Click “Wireless Bridge” (2) on the left-hand side of the screen. You will see the following screen.

7.Check the box that says, “Enable ONLY specific Access Points to connect” (1).

8.In the field named “AP1” (3), type in the MAC address of your secondary access point. When you have typed in the address, click “Apply Changes”.

9.Bridging is now set up.

Note: It may take up to a minute for the bridged connection to properly establish itself. In some cases, it may be necessary to restart the access point and the Router to initiate the bridge.

(2)

(1)

(3)

G Wireless Modem Router 40