Belkin PM01218ea F5D7634-4 user manual Setting MAC-Address Filtering

Manually Configuring your Router

Table of Contents sections 1 2 3 4 5 6

Setting MAC-Address Filtering

The MAC-address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access. When you enable this feature, you must enter the MAC address of each client (computer) on your network to allow network access to each. The “Block” feature lets you turn on and off access to the network easily for any computer without having to add and remove the computer’s MAC address from the list. To enable this feature, select “Enable MAC Address Filtering” (1). Next, select the access rule as “Allow” or “Deny”.

Then, enter the MAC address of each computer on your network by selecting from the “DHCP Client List” drop-down box (2) and the ID to copy to (3) before clicking “Copy to”. As an alternative method, click in the space provided (4) and enter the MAC address of the computer you want to add to the list. Click “Apply Changes” to save the settings.

Note: You will not be able to delete the MAC address of the computer you are using to access the Router’s administrative functions (the computer you are using now).

7 8 9 10

(1)

(2)

(3)

(4)

G Wireless Modem Router 45