Belkin 802.11g manual Information, FCC Statement, Modifications

Page 29

INFORMATION

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR

ELECTROMAGNETIC COMPATIBILITY

We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product,

F5D7330

to which this declaration relates,

complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Exposure to Radio Frequency Radiation.

The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such manner that the potential for human contact normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the distance between the equipment and the receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Modifications

The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the users authority to operate the equipment.

26

Image 29
Contents P74397 802.11g Wireless Ethernet Bridge Table of Contents System Requirements Package ContentsIntroduction Overview FeaturesApplications and Advantages Connection rates of up to 54MbpsProduct Specifications Wlan Link LED Knowing your Wireless Ethernet Bridge Power Link LEDEthernet Link LED Connecting the Hardware Connecting the Bridge Using the Setup Wizard Connecting the Bridge Using the Setup Wizard Ad-Hoc Computer-to-Computer Access PointAdapter Bridge Name SsidChannel Gateway IP addressSubnet Mask Network Key EncryptionPassphrase Hex KeyConfirm all your settings are correct then click Finish Windows 98SE, Me, 2000, and XP Setting UP Your Computer to USE the WEB-BASED InterfaceUnderstanding the Advanced Web-Based User Interface Logging into the Web-Based SetupLogging Out of the Web-Based Setup Wlan Settings LAN SettingsStatus Quick Navigation LinksBridge Name Bridge SettingsIP Configuration Gateway IP Adress Authentication ModeMode WEP EncryptionKey ID Site Survey Restart the Wireless BridgeRefresh JoinRestore Previous Settings Restore Factory DefaultSave Current Settings Browse Upgrade Firmware UpdateLogin Timeout PasswordWindows XP Environment TroubleshootingCannot connect to the network Computers are not communicating with the network Data transfer is sometimes very slowData transfer is always very slow Technical Support FCC Statement InformationModifications Federal Communications Commission NoticeEurope-European Union Notice Canada-Industry Canada ICBelkin Corporation Limited Lifetime Product Warranty