Back Panel

1.Matrix IR IN - Used to control matrix I/O switching from a 3rd party IR controller.

2.Matrix IR Out - Global output, combines IR for all discrete IR output ports.

3.Firmware Update - Type B USB Port used for updating the matrix firmware only

4.RS-232 - Connect to this port for control from a computer or 3rd party controller.

5.Main Power - Plug included 24V/6.25A DC adaptor to power the matrix switcher

6.Audio Input Ports - 3.5mm stereo audio port enabled only when a DVI/D adaptor is connected, disabled when HDMI cable is connected.

7.HDMI Input Ports - Connect HDMI sources into these ports, such as DVD players, Blu-ray players, computers, etc.

8.IR 3.5mm mono In ports - Used in conjunction with 3rd IR party controller to extend IR control commands to video displays over CAT5e/6/7.

Note: Be sure you’re using a mono to mono 3.5mm IR cable (i.e. AT-MINIMONO6) for 3rd party control boxes, stereo 3.5mm cables are not compatible.

9.IR Out ports - Sends IR signal to sources through a 3.5mm mono IR emitter

10.CAT5e/6/7 Output ports - Extends video and bidirectional RS-232, IR, and audio signals through a single CAT5e/6/7 cable.

11.Backup Power - Redundant power supply in case the main power supply fails. Includes second

24V/6.25A DC adaptor.

Toll free: 1-877-536-3976	6	atlona.com
Local: 1-408-962-0515