Panel Description
Front Panel
2
1
5
8
3 
4
7 
6 
a
b
c
d
e
f
g
1.Power Indicators. Red LED will light up when using main or backup power supply.
2.IR Receiver Window. Receives the signal from the included IR Remote Control or a 3rd party IR Controller.
3.Power Indicator. The light will illuminate red when the Matrix is in standby mode or green when the matrix is on.
4.Power Button. Cycles the power between on or off (standby) mode.
5.Enter Button. Use to view current status for inputs and outputs or to confirm a command.
6.Cancel Button. Within the functions menu use to go back one screen or to the home screen.
Note: You cannot power off or change functions unless you go to the home screen.
7.Function Button. Allows you to select command options.
a.Lock: Locks all the panel keys so nothing can be altered until unlocked.
b.All: Save a single input to all the outputs with this function.
c.Default: Mirrors all inputs to corresponding outputs. (i.e. 1 to 1, 2 to 2, 3 to 3, etc.)
d.Save: Save the current input and output route to memory. Up to 8 programmable memories.
e.Recall: Load the input and output routes that you have previously saved.
f.EDID: This function allows for individual output properties to be saved, altered or loaded to
inputs. EDID has 8 memory settings to save to for easy loading later.
Note: Default setting for EDID is the highest common HD resolution of all connected devices. (i.e. if you have resolutions ranging 720p, 1080i, and 1080p then 720p would be the default resolution for all connected displays.)
g. Firmware: This function option will display the current firmware the Matrix has installed.
8.Number buttons. Use these buttons to select input and output paths or use with the function button to change multiple matrix settings.
Toll free: | 5 | atlona.com |
Local: |