Atlona AT-PRO3HD44M user manual Panel Description, Front Panel, atlona.com

Page 5
Panel Description

Panel Description

Front Panel

1 Front PanelManual background 2

6

3 Manual backgroundManual background 4 Manual backgroundManual background 5 Manual backgroundManual background a Manual backgroundManual background b Manual backgroundManual background c Manual backgroundManual background d

1.IR Receiver Window. Receives the signal from the included IR Remote Control or a 3rd party IR Controller.

2.Power Button. Cycles the power between On (blue backlight) or Standby (red backlight) mode.

3.Function Button. Allows you to select command options. (blue backlight when selected)

a.Default: Mirrors all inputs to corresponding outputs. (i.e. 1 to 1, 2 to 2, 3 to 3, etc.)

b.All: Save a single input to all the outputs with this function.

c.Memory: Save/load the current input and output route to memory.

d.EDID: Save/Load EDIDs to individual inputs.

Note: Default setting for EDID is the highest common HD resolution of all connected devices. (i.e. if you have resolutions ranging 720p, 1080i, and 1080p then 720p would be the default resolution for all connected displays.)

4.Enter Button. Use to view current status for inputs and outputs or to confirm a command.

5.Cancel Button. Within the functions menu use to go back one screen or to the home screen.

Note: You cannot power off or change functions unless you go to the home screen.

6.Number buttons. Use these buttons to select input and output paths or use with the function button to change multiple matrix settings.

atlona.com

5

Toll free: 1-877-536-3976

Local: 1-408-962-0515

 

 

Image 5
Contents AT-PRO3HD44M atlona.comAtlona HDMI 4 by 4 Matrix Switcher over CAT5e/6/7 Table of Contents Features Package ContentsIntroduction 1 x 24V/6.25A DC adaptor 1 x Power cord 1 x IR ExtenderRemote Control SpecificationsBefore You Start stormsFront Panel Panel DescriptionBack Panel 3rd party controller to the AT-PRO3HD44M example AT-MINIMONO6 Connection and Installation3rd Party Controller Set Up AT-PRO3HDREC IR Remote Control Set UpI/O Control Matrix Front Panel FunctionsFeedback = ”Input # saved to all”Feedback= EDID Set UpView I/O settings Matrix SettingsRS-232 CommandConnection CommandCommand for Matrix baud rate RS-232 Set UpBaud Rate Note Baud Rate must be only 2400, 4800, 9600, 19200, 38400, 57600, orCommand for Output receiver baud rate RS-232 Command for the Output baud rate statusRS232para RS232paraXbaudrate,data-length,parity,stop-bitUpdating and Resetting Resetting to factory settingsUpdating firmware Precautions Safety InformationSafeguards Limited Warranty WarrantyCustomer Remedies No other warrantiesAtlona Product Registration