Barco MIVD 1218 user manual Connecting the signals, To remove the strap

Page 10

To remove the strap:

1Position the display with its rear side facing you.

2If the foot cover is mounted on the foot, lift up the 2 clips of the foot cover to release the cover from the foot.

3Pull the lower side of the cover towards you and simultaneously slide the cover downward.

4Pull the red strap out of the fixation holes in the foot.

Strap

To change the panel orientation:

1Stand at the front side of the panel and take the panel at both sides.

2Very important: Tilt the panel before changing the orientation.

Should you change the panel orientation without tilting it first, you might irreversibly damage the tilt & swivel mechanism.

3To change from portrait to landscape, turn the panel counterclockwise while tilting it slightly.

To change from landscape to portrait, turn clockwise.

2.4.Connecting the signals

To get access to the connectors, open the cover of the connector compartment by pulling down the 2 clips of the cover.

To connect DVI signals:

1Connect one end of the DVI cable to the DVI input (5) of the display.

2Connect the other end of the DVI cable to the video output of your DVI signal source.

3Rout the cable so that it enters the connector compartment at the place where the cover is bulged.

User manual MIVD 1218

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Mivd Page Safety instructions CAN/CSA-C22.2 No .1-M90 c ULContents OSD ALC Options OverviewIntroduction Memory scan modesPackage contents Controls and connectorsInput panel at the rear Installation PrecautionsConnecting the signals To remove the strapTo connect analog video & sync signals To put the foot cover in place Starting up Navigating through the menus OperationSaving changes To enter the menu Controlling contrast and brightnessTo change contrast or brightness manually To select the calibrated position Controlling the light outputAdditional information Calibrating the display When do you need to calibrate?Required test pattern To perform the calibrations Different calibration functionsGetting information General informationTo perform the adjustments Adjusting GeometryTiming information Settings Automatically when possible. E.g., if the imageTest Pattern Input SelectionLookup Tables ALC active Power LedFilter Dpms activeDe-interlacing Advanced settingsCAL options OSD Factory reset Scan modeControl wheel Service Panel MaintenanceCleaning instructions CabinetPixel Faults TroubleshootingCalibration not successful Technical specifications Dimensions W x D

MIVD 1218 specifications

The Barco MIVD 1218 is a state-of-the-art multi-image video display processor that stands out for its advanced features and cutting-edge technologies. Designed for professionals in fields such as command and control, security, and large-scale events, this device enhances the visualization capabilities and enables seamless integration of multiple video sources.

One of the main features of the MIVD 1218 is its impressive input and output capabilities. With support for a wide array of sources—ranging from standard video signals to high-definition and ultra-high-definition formats—this video processor ensures that users can easily incorporate different media types into their presentations. It supports a substantial number of input channels, making it ideal for complex setups where multiple feeds need to be managed simultaneously.

The MIVD 1218 boasts advanced image processing technologies that enhance the quality of visual outputs. It utilizes high-definition scaling and de-interlacing techniques to ensure that images are displayed with clarity and precision. This is crucial for applications where detail and accuracy are paramount, such as in surveillance operations or emergency response scenarios.

Another characteristic that sets the Barco MIVD 1218 apart is its user-friendly interface. It features an intuitive control system that allows operators to manage video feeds easily, switch between inputs, and adjust settings on the fly without requiring extensive training. This accessibility is critical in high-pressure environments where time and accuracy are of the essence.

Connectivity options are robust with the MIVD 1218. The unit includes a variety of ports, including HDMI, SDI, and DisplayPort, allowing for versatile integration into existing setups. Furthermore, it offers network connectivity for remote management and control, enabling operators to access the system from virtually anywhere.

Overall, the Barco MIVD 1218 is a powerful multi-image processor that combines advanced technology, flexibility, and ease of use. Its ability to handle multiple inputs, high-quality processing capabilities, and user-friendly design make it a top choice for professionals requiring reliable video management solutions in dynamic environments. Whether used in control rooms, during live events, or in emergency situations, the MIVD 1218 delivers unparalleled performance and clarity, ensuring that critical information is presented effectively.
Top Page Image Contents