Barco MIVD 1218 user manual Technical specifications

Page 30

6. Technical specifications

GEOMETRY

Screen size: 46 cm (18.1")

Display area: 359 mm x 287 mm (14.1" x 11.3")

Aspect ratio: 5:4

VISUAL PERFORMANCE

General

Pixel arrangement: sub- pixel vertical stripes

Pixel pitch: 0.2805 mm x 0.2805 mm (0.011" x 0.011")

Panel contrast ratio: 550:1 (typical)

Panel viewing angle: +/- 85° (at CR = 10:1)

Panel

Thin film transistor active matrix grayscale LCD

PVA technology

Amorphous silicon TFT

Backlight: 6 cold cathode fluorescent lamps

Luminance

Calibrated: 500 cd/m2 (145.9 fL)

Resolution

Up to 1280 x 1024 (1.3 MegaPixel)

INPUTS

DVI

Complies to DVI Rev. 1.0 spec

Video

Connector type: BNC

Inputs provided: composite video

Video input voltage: nominal 0.7Vpp

Termination: 75 Ohm

Sync

Connector type: BNC

Inputs provided: HS/CS and VS

Sync input voltage: nominal 2Vpp

Termination: 75 Ohm

SCANNING SYSTEM

Horizontal Frequency: 15 - 95 kHz

Vertical Frequency: 50 - 140 Hz

Interlaced / non- interlaced signals

Interlaced: Fuzzy-logic- based de-interlacing

Multi-sync

14 programmable scan modes

User manual MIVD 1218

30

Image 30
Contents Mivd Page Safety instructions CAN/CSA-C22.2 No .1-M90 c ULContents OSD ALC Options OverviewIntroduction Memory scan modesPackage contents Controls and connectorsInput panel at the rear Installation PrecautionsConnecting the signals To remove the strapTo connect analog video & sync signals To put the foot cover in place Starting up Operation Navigating through the menusSaving changes Controlling contrast and brightness To enter the menuTo change contrast or brightness manually Controlling the light output To select the calibrated positionAdditional information When do you need to calibrate? Calibrating the displayRequired test pattern To perform the calibrations Different calibration functionsGetting information General informationAdjusting Geometry To perform the adjustmentsTiming information Settings Automatically when possible. E.g., if the imageInput Selection Test PatternLookup Tables ALC active Power LedFilter Dpms activeAdvanced settings De-interlacingCAL options OSD Scan mode Factory resetControl wheel Service Panel MaintenanceCleaning instructions CabinetTroubleshooting Pixel FaultsCalibration not successful Technical specifications Dimensions W x D

MIVD 1218 specifications

The Barco MIVD 1218 is a state-of-the-art multi-image video display processor that stands out for its advanced features and cutting-edge technologies. Designed for professionals in fields such as command and control, security, and large-scale events, this device enhances the visualization capabilities and enables seamless integration of multiple video sources.

One of the main features of the MIVD 1218 is its impressive input and output capabilities. With support for a wide array of sources—ranging from standard video signals to high-definition and ultra-high-definition formats—this video processor ensures that users can easily incorporate different media types into their presentations. It supports a substantial number of input channels, making it ideal for complex setups where multiple feeds need to be managed simultaneously.

The MIVD 1218 boasts advanced image processing technologies that enhance the quality of visual outputs. It utilizes high-definition scaling and de-interlacing techniques to ensure that images are displayed with clarity and precision. This is crucial for applications where detail and accuracy are paramount, such as in surveillance operations or emergency response scenarios.

Another characteristic that sets the Barco MIVD 1218 apart is its user-friendly interface. It features an intuitive control system that allows operators to manage video feeds easily, switch between inputs, and adjust settings on the fly without requiring extensive training. This accessibility is critical in high-pressure environments where time and accuracy are of the essence.

Connectivity options are robust with the MIVD 1218. The unit includes a variety of ports, including HDMI, SDI, and DisplayPort, allowing for versatile integration into existing setups. Furthermore, it offers network connectivity for remote management and control, enabling operators to access the system from virtually anywhere.

Overall, the Barco MIVD 1218 is a powerful multi-image processor that combines advanced technology, flexibility, and ease of use. Its ability to handle multiple inputs, high-quality processing capabilities, and user-friendly design make it a top choice for professionals requiring reliable video management solutions in dynamic environments. Whether used in control rooms, during live events, or in emergency situations, the MIVD 1218 delivers unparalleled performance and clarity, ensuring that critical information is presented effectively.