Barco MD-4221 user manual Unpacking and handling tips, Optimize the lifetime of your display

Page 14

Recommendations for using your display system

1. Optimize the lifetime of your display

Enabling the Display Power Management System (DPMS) of your display (in the display’s Settings menu) will optimize LCD backlight lifetime by automatically switching off the backlight when the display is not used for a specified period of time. By default, DPMS is enabled on your display, but it also needs to be activated on your workstation. To do this, go to “Power Options Properties” in the “Control Panel”.

Barco recommends setting DPMS activation after 20 minutes of non-usage.

2. Use a screen saver to avoid image retention

Prolonged operation of an LCD with the same content on the same screen area may result in a form of image retention.

You can avoid or significantly reduce the occurrence of this phenomenon by using a screen saver. You can activate a screen saver in the “Display properties” window of your workstation.

Barco recommends setting screen saver activation after 5 minutes of non-usage. A good screen saver displays moving content.

In case you are working with the same image or an application with static image elements for several hours continuously (so that the screen saver is not activated), change the image content regularly to avoid image retention of the static elements.

3. Understand pixel technology

LCD displays use technology based on pixels. As a normal tolerance in the manufacturing of the LCD, a limited number of these pixels may remain either dark or permanently lit, without affecting the diagnostic performance of the product. To ensure optimal product quality, Barco applies strict selection criteria for its LCD panels.

To learn more about LCD technology and missing pixels, consult the dedicated white paper available at www.barcomedical.com.

Unpacking and handling tips

The display is a precision instrument that requires proper care to maintain product operation and adherence to specification. Unpack the display and components carefully, then set up and handle the unit properly to avoid damage to the LCD panel.

Always lift and carry the display with 2 persons.

Use both hands to grasp the display case when lifting it from the shipping carton, but avoid touching the screen.

14

Image 14
Contents MD-4221 Page Copyright notice Table of Contents Environmental information PrefaceImportant notice TrademarksSafety Instructions On SafetyIntended Use On installationEnvironmental Conditions for transport and Storage UL 60601-1/CAN/CSA C22.2 no EEC Safety Compliance Cleaning Instructions MaintenanceClassification AccessoriesServicing FCC Information FCC WarningDirectly connected to Electromagnetic compatibility Use a screen saver to avoid image retention Unpacking and handling tipsOptimize the lifetime of your display Understand pixel technologyExplanation of symbols Preventing fire and injuryPage Package Overview IntroductionQuick Startup Connectors Page Mechanical product drawing Remote control ControlsOSD buttons position OSD Button Function Power management Adjust On-Screen Display MenusAuto Adjust Color tempAdvanced Setup OSD TimeoutPIP OSD functions description Menus Function DescriptionsPage Page Page Page Standard signal table PC modes supportedSDI video format DVI in-out 24-pin DVI-D Signal connector pin assignmentsVGA 15-pin D-sub Video BNC RS232C D-Sub 9-pin SDI BNCRGB HV/RGBS/YPbPr BNC Specifications MD-4221Barco MID General Warranty Terms and Conditions Page Page Article 3 Obligations of the Customer Article 5 Disclaimer of Warranties Page