Teac R-3 owner manual Rechargeable Batteries, Battery Replacement

Page 4

Rechargeable Batteries

The R-3 uses a Nickel-Metal-Hydride battery pack stored in the battery compartment. Leaving the AC adaptor connected to the R- 3 and plugged into an AC line, even when not in use, ensures the batteries will be fully charged when you need to use the R-3 on battery power. The R-3 can be used for 3 to

3.5hours after batteries are fully charged. (When the volume is set to 20.)

<When the batteries need to be recharged, the STANDBY/ON indicator blinks at regular intervals. The blinking interval will grow faster as the batteries get closer to discharge until the R-3 shuts off automatically to protect the batteries.

<When the R-3 is not being used but the AC adaptor is plugged in, the batteries will be completely charged within approximately 3.5 hours from a full discharge. During this period the STANDBY/ON indicator will flash.

<When the R-3 is ON and the AC adaptor plugged in, the batteries will be completely charged within approximately 24 hours.

<It may take up to 4 charge and discharge cycles before the batteries are operating at full capacity when the R-3 is new or left unused for several weeks.

It is suggested that the R-3 be plugged in for about 12 hours before you use it for the first time.

<Once the R-3 has been fully charged while it is STANDBY, do not unplug the AC adaptor and then immediately plug it again. This will restart the charging cycle even though the batteries are fully charged. Doing this repeatedly will damage the batteries.

<If the R-3 is not plugged in, the batteries will slowly discharge as a safety measure.

Battery Replacement

When the batteries are exhausted, replace the battery pack with a new one.

1.Remove the battery compartment cover.

2.Disconnect the battery pack connector, and remove it.

3.Insert a new battery pack and attach its connector.

4.Close the cover.

Caution:

<Do not heat or disassemble rechargeable batteries. Never dispose of old batteries by throwing them in a fire

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents DAB L-BAND/DAB BAND-#/FM Radio Contents Before Using the Unit MaintenanceBattery Replacement Rechargeable BatteriesAbout DAB Connections AC OutletMain Power switch AUX in jackTelescopic Antenna Headphone jackUnit Functions Button DisplayAdjust the volume To turn off the main power To save batteryBasic Operation To select a sourceSystem Resetting If you want to initialize the settingListening through headphones DAB modeListening to the DAB Radio Auto TuningPress the Auto Scan button Select the station you want to listen to Press the Enter buttonWithin 3 seconds press the Enter button Manual Tuning How to listen to L-band Auto Select function Ensemble name Display Setting of the DABDate and time Signal level Software versionProgramme type BitrateManual Tuning Listening to the FM RadioPreset Stations FM modeHow to preset stations How to select preset stationsListening to an External Source 90, 75, 60, 45, 30 Sleep TimerPress the Enter button twice Timer Enter Alarm Tuning Multi JOGPress the Enter button to complete the timer setting AUX AUXTo turn the timer off To check the timer settingTo stop the timer working Snooze FunctionTroubleshooting Specifications Teac Corporation

R-3 specifications

The Teac R-3 is a versatile and robust reel-to-reel tape recorder that has captured the attention of audio enthusiasts and professionals alike. Renowned for its high-quality playback and recording capabilities, the R-3 combines classic analog technology with modern features, making it a valuable asset for both music lovers and sound engineers.

One of the standout characteristics of the Teac R-3 is its dual-capstan transport system, which ensures smooth and stable tape movement. This technology minimizes wow and flutter, resulting in accurate reproduction of sound across a wide dynamic range. With its three-motor system, the R-3 excels in maintaining precise speed control, essential for high-fidelity audio performance.

The R-3 also offers multiple track configurations, including 2-track and 4-track formats. This versatility allows users to choose the playback format that best suits their needs, whether for stereo recordings or multi-track productions. The ability to switch between these configurations adds to the machine's adaptability in various audio applications.

In addition to its mechanical prowess, the Teac R-3 features a user-friendly interface that simplifies operation. The front panel is equipped with clear meters for monitoring levels, allowing for precise adjustments during recording. Moreover, the inclusion of automatic tape detection enhances usability, enabling the recorder to identify the type of tape being used and adjust settings accordingly.

Quality components are fundamental to the R-3's design. It employs high-grade aluminum tape guides and precision-machined parts, ensuring durability and long-lasting performance. The machine is also designed to accommodate various tape widths, providing flexibility in tape selection for different projects.

Further enhancing its functionality, the Teac R-3 includes a range of connectivity options, making it easy to integrate into any audio setup. With RCA inputs and outputs, as well as balanced XLR connections, users can connect the recorder to a wide array of audio sources and mixing consoles, facilitating seamless recording and playback.

Sound quality remains a top priority for Teac, and the R-3 is no exception. It delivers a warm, rich sound that is often associated with analog recording, appealing to audiophiles who appreciate the authenticity of tape-based music. Whether for personal use, professional recording, or archiving valuable material, the Teac R-3 stands out as a reliable and high-performance choice, embodying the marriage of vintage charm and modern technology.
Top Page Image Contents