3M M150 manual Image

Page 26

26

M150 FPD Monitor Installation Guide

You can use the Position option to center the image on the display manually. Use the ◄/left and ►/right arrow buttons to scroll through the position menu.

•H-Position is used to adjust the horizontal image position manually.

•V-Position is used to adjust the vertical image position manually.

Image

Use the ◄/left and ►/right arrow buttons to scroll through the image menu.

Phase: If the phase of your monitor is not fine-tuned, you may observe unstable horizontal noise lines and cross-talk stretching from the edge of small windows on your display.

If you change your display to Windows shut down mode, this noise will be more visible, and easier to eliminate. Click on the "Start" button at the bottom right side, and then click Shut Down. This will bring you to the Windows shutdown mode. After finishing phase adjustment, click on the "Cancel” to return to your original Windows display.

Clock: If the clock setting of your image is not fine-tuned, you may observe periodic vertical bars of video noise on your image. These bars of noise are usually adjusted out when an Auto Configuration is performed. If the bars of noise are still present, this setting can be adjusted manually.

Adjust this setting so that either the vertical bars of noise are replaced by an even amount of noise across the whole screen, or the noise disappears completely.

If you do an Auto Config, the monitor will try to find the best Clock/Phase setting. If you are not satisfied with the auto adjustment, fine-tune the phase manually as described above.

3M Touch Systems Proprietary Information

Page 25 Page 27
Image 26
Page 25 Page 27
Contents M150 Flat Panel Display Touch Monitor User Guide M150 FPD Monitor Installation Guide Contents Chapter Video Display Options Important Safety Information OverviewExplanation of Symbols VDEService and Repair Indicators 3M Touch Systems Support Services3M Touch Systems Worldwide Offices Introduction to Flat Panel Displays Capacitive and Resistive Options Native Video Resolution on a Flat Panel DisplayOptions for Using Other Video Resolutions Setting Up Your M150 FPD Monitor System RequirementsUnpacking Your Touch Monitor Arm Mounting OptionCountertop Base Mounting Option Disassembling the Yoke & Base for Arm MountingAccess to the Video Controls Adjusting the Viewing AngleSupported Video Display Modes and Refresh Rates Installing the Video Card and Video DriverConfiguring the Display Settings Optional Card Reader Bracket Multimedia FeaturesUsing the Standard Controls for the Video Card Supported MagStripe ReadersConnecting the Touch Monitor ID Tech MagTek All MiniMag readers All mini sized ReadersIdentifying Your Monitor Connections Cable Management System Removing the Cable Management CoverTesting the M150 FPD Installing TouchWare SoftwareCalibrating the Touch Screen Page Adjusting the M150 Video Display Video Display OptionsAuto Config BrightnessPosition ContrastColor Image Lock Out Feature Miscellaneous MenuPage Maintaining Your Touch Monitor Maintenance and TroubleshootingTouch Screen Care and Cleaning Monitor Installation Problems Problem Possible Causes and SolutionsM150 Regulatory Agency Approvals Troubleshooting the Touch ScreenPower Management CE Conformity for Europe FCC WarningM150 Base Plate Mounting Template

M150 specifications

The 3M M150 is a groundbreaking device that has redefined the landscape of personal protective equipment in various industrial settings. Known for its exceptional filtration capabilities and comfortable fit, the M150 is at the forefront of respiratory protection technology.

One of the standout features of the 3M M150 is its advanced filtration system, which employs a multi-layer design. This system includes a pre-filter that captures larger particles, allowing the main filter to focus on smaller, harmful contaminants. This two-stage filtration not only enhances the efficiency of the respiratory protection but also extends the lifespan of the filter, making it an economical choice for users.

The M150 utilizes 3M's proprietary Comfort and Convenience Technology, providing users with a snug yet comfortable fit. The lightweight materials used in its construction reduce fatigue even during prolonged wear, which is particularly important for professionals in construction, manufacturing, and healthcare sectors. An adjustable head strap allows for a customizable fit, ensuring that the mask remains securely in place without causing discomfort over extended periods.

Another significant characteristic of the 3M M150 is its compatibility with other personal protective equipment. Designed with versatility in mind, the M150 can be easily paired with safety goggles, face shields, and hearing protection systems. This interoperability is crucial in environments where multiple hazards exist, allowing users to maintain comprehensive safety without compromising comfort.

The M150 features a low-profile design that enhances visibility and minimizes interference with other equipment, making it a practical choice for work in confined spaces or environments requiring detailed visual tasks. Additionally, the quick-release design of the head straps allows for easy removal and replacement, facilitating quick transitions between tasks.

In terms of maintenance, the 3M M150 is designed for easy cleaning and upkeep. The filter elements can be replaced without difficulty, ensuring that users can maintain optimal performance with minimal downtime. Overall, the 3M M150 stands out as a leader in the respiratory protection market, combining cutting-edge technology with user-centric design elements to meet the diverse needs of professionals across various industries. Its commitment to safety, comfort, and efficiency makes it an invaluable tool for those exposed to hazardous environments.
Top Page Image Contents