3M 3M034-030-TNG and 3M034-031-TNG, 3M034-3-TNG manual Box Contents

Page 5

Box Contents

Check that the following items are included with the 3M™ EM Aware TNG ESD Event Monitor Starter Kit shipping box:

A. EM Aware TNG module

B. Remote antenna with cable

C. Power adapter

D. Container with metal screws

Installation and Mounting Instructions (Optional)

The 3M EM Aware TNG ESD Event Monitor Model 3M034 can be mounted horizontally or vertically. For semi-permanent positioning, two #4-40 screws or an equivalent may be used. For such an installation, mark the surface where the holes should be drilled and drill pilot holes using a #44 tap drill size.

Connect the EM Aware TNG Monitor

Connect the EM Aware TNG monitor shown in Figure 1 below.

Figure 1

Alternatively, the EM Aware TNG monitor can be connected as a stand-alone system. Follow the connection shown in Figure 2 below.

Figure 2

Test the EM Aware TNG monitor by plugging the power adaptor into the main power supply. The power adapter is +12V DC supply with a 2.1 mm barrel connector, center positive. The EM Aware TNG monitor will light up with the display. Shake the container

above the antenna and the EM Aware TNG monitor should respond with beeps.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents User’s Guide 3M EM Aware TNG ESD Event MonitorIntended Use 3M EM Aware TNG ESD Event Monitor Safety StatementsIndustry Canada Avoid touching antenna when meter is turned onBox Contents Controlling the 3M EM Aware TNG ESD Event Monitor Application note Measuring EMI Noise Changing the ESD Event ParametersApplication note Measuring ESD Events Application note Measuring/Detecting Static Voltage Changing the Static Voltage ParametersApplication note Measuring Charge Decay Changing the Ionization Balance and Decay ParametersRegulatory Information China RoHS 部件名称 有毒有害物质或元素 Technical assistance contact information
Top Page Image Contents