IBM GC28-1920-01 manual prefix.local-node.local-node .INMSG

//RRSFALTR JOB 'JOB TO RENAME WORKSPACE DATA SETS',MSGLEVEL=￿1,1 //\

//\ USE A JOBCAT OR STEPCAT WHERE NEEDED TO POINT TO THE CATAL￿OG //\ THAT CONTAINS THE INFORMATION NEEDED FOR YOUR DATA SETS￿. //\

//STEP1	EXEC	PGM=IDCAMS
//\ THE WORKSPACE DATA SETS THAT REFER TO THE LOCAL SYSTEM SH￿OULD
//\ BE CHANGED AS FOLLOWS:
//SYSPRINT DD		SYSOUT=\
//SYSIN	DD	\
ALTER -
	prefix.local-node.local-node.INMSG -
	NEWNAME(prefix.sysname.INMSG)
ALTER -
	prefix.local-node.local-node.INMSG.INDEX -
	NEWNAME(prefix.sysname.INMSG.INDEX)
ALTER -
	prefix.local-node.local-node.INMSG.DATA -
	NEWNAME(prefix.sysname.INMSG.DATA)
ALTER -
	prefix.local-node.local-node.OUTMSG -
	NEWNAME(prefix.sysname.OUTMSG)
ALTER -
	prefix.local-node.local-node.OUTMSG.INDEX -
	NEWNAME(prefix.sysname.OUTMSG.INDEX)
ALTER -
	prefix.local-node.local-node.OUTMSG.DATA -
	NEWNAME(prefix.sysname.OUTMSG.DATA)
//STEP2	EXEC	PGM=IDCAMS

//\ THE WORKSPACE DATA SETS THAT BACKUP THE RRSF TRANSACTIO￿NS SENT TO //\ AND RECEIVED FROM OTHER SYSTEMS SHOULD BE CHANGED AS FOL￿LOWS:

//SYSPRINT DD		SYSOUT=\
//SYSIN	DD	\

ALTER - prefix.local-node.remote-node.INMSG - NEWNAME(prefix.local-lu.remote-lu.INMSG)

ALTER - prefix.local-node.remote-node.INMSG.INDEX - NEWNAME(prefix.local-lu.remote-lu.INMSG.INDEX)

ALTER - prefix.local-node.remote-node.INMSG.DATA - NEWNAME(prefix.local-lu.remote-lu.INMSG.DATA)

ALTER - prefix.local-node.remote-node.OUTMSG - NEWNAME(prefix.local-lu.remote-lu.OUTMSG)

ALTER - prefix.local-node.remote-node.OUTMSG.INDEX - NEWNAME(prefix.local-lu.remote-lu.OUTMSG.INDEX)

ALTER - prefix.local-node.remote-node.OUTMSG.DATA - NEWNAME(prefix.local-lu.remote-lu.OUTMSG.DATA)

/\

Figure 20 (Part 2 of 2). JCL to Rename the Workspace Data Sets

Chapter 5. Installation Considerations31