Directv programming

To toggle between satellites when subscribing to multi-satellite programming—

The MV3500T will toggle between the primary and seconday satellites for either DISH Network or DIRECTV. Both have programming on more than one satelite. When a channel is selected on the remote control and is not on the satellite cur- rently selected, the unit will automatically toggle to the correct satellite.

1.DIRECTV receivers must be set for oval dish 2 sat selection to enable toggling between primary 101°W satellite and alternate 119°W satellite only. (Consult receiver manual for procedure.) After receiver is set for the correct dish selection, when you request a channel located on a differ- ent satellite, the unit will automatically toggle to that satellite.

DISH Network programming (DISH 500)

DISH Network receivers must have the “SW42” switch installed in order to toggle between the pri- mary 119° satellite and the alternate 110° satellite. (Consult your receiver manual for the procedure to reach the “check switch” menu.)

To install the “SW42” switch:

1.Before turning on your MV3500T system, make sure that your satellite receiver and television are turned on and your receiver is on the “point dish” menu. (Consult your owner’s manual to reach this menu.)

2.While the vehicle is stationary, turn on the

MV3500T system and wait for signal acquisition on satellite 119°.

3.After signal is acquired, the system will continously track the signal for approximately six minutes. At the end of six minutes, the unit will enter sleep mode. You now have six minutes to complete Check Switch test. Consult your re- ceiver manual for instructions on running the test. Be sure that Superdish and Alternate are un- checked if applicable. Onscreen options may vary by receiver.

4.During the Check Switch Test, the receiver will begin checking the switch by toggling between satellites. When this is completed, SW42 will ap- pear on the screen. It will be at the top of the screen, satellite designations will be below, show- ing odd and even transponders. See illustration.

If a switch other than SW42 appears, or you have an X in one of the boxes below the satel- lites, repeat Check Switch Steps.

5.Your system is now set up to toggle between satellites. It will automatically move to the correct satellite when a channel is selected with your re- mote control.

NOTE: Once these steps are completed, you won’t have to perform this test again, unless Check Switch was performed on another satel- lite dish, such as a home dish.

!satellite dish will move from the primary to the alternate satellite in order to receive multi-satellite programming.Toggle: Your Winegard automatic

Install Summary

SW42

Input:	1	1	1	1
Satellite:	119	119	110	110
Polarity:	Odd	Even	Odd	Even
Status:	Satellite reception verified
	Superdish			Alternate
	Cancel		Test	Help

Check Switch screen display

NOTE: Be sure the “Superdish” and “Alternate” boxes ARE NOT checked.

MVT-35B, MVT-35W, WI3535T, MV3500T, MV3535T specifications

The Winegard MV3500T, MV3535T, MVT-35B, MVT-35W, and WI3535T are some of the most advanced and versatile over-the-air TV antennas available today. Designed for both urban and rural environments, these antennas offer exceptional reception capabilities and a range of features that cater to diverse viewing needs.

The MV3500T is a compact, high-performance antenna that integrates advanced technology to ensure reliable reception of digital TV signals. Its sleek design allows for easy installation on rooftops or walls, and its lightweight construction means it can be mounted without the need for heavy-duty support. The MV3500T is engineered to receive UHF and VHF signals, making it suitable for a broad spectrum of broadcast channels.

The MV3535T is a step up, featuring a larger element size that enhances its reception capabilities. This model is particularly beneficial for users living in areas farther away from broadcasting towers. The MV3535T's multi-directional reception technology ensures that users can receive signals from multiple directions without having to constantly adjust the antenna’s position.

For those who prioritize flexibility in installation, the MVT-35B and MVT-35W models stand out. These antennas are designed for portable use, which makes them perfect for RVs, boats, and tailgating. The MVT-35B features a black finish, while the MVT-35W comes in white, allowing users to choose a model that best matches their aesthetic preferences. Both models benefit from Winegard’s patented dual-band technology, ensuring robust signal reception in fluctuating weather conditions.

Lastly, the WI3535T is notable for its smart technology integration. This antenna comes equipped with a built-in preamplifier that enhances weak signals, making it easier to pick up channels that might otherwise be missed. The WI3535T is designed with a weather-resistant casing, ensuring durability and longevity even when exposed to harsh environmental conditions.

In summary, the Winegard MV series antennas exemplify cutting-edge technology with features tailored for optimal performance. Whether users are seeking a stationary solution or a portable antenna for on-the-go viewing, models like the MV3500T, MV3535T, MVT-35B, MVT-35W, and WI3535T provide the necessary versatility and reliability for enjoying high-quality over-the-air television programming. With these antennas, Winegard continues to set the standard for innovative reception solutions in the industry.