IBM DS8000 manual CMUG00094E Unable to attach host. No I/O port is selected

CMUG00091W The current License Machine Code activation codes will be overwritten by the codes being imported. Select Continue to overwrite the current codes with the new codes. Select Cancel to cancel the operation.

Explanation

You are being asked to confirm that you want to overwrite the current License

Machine Code activation codes with values imported from the file you selected.

Action

Select Continue to overwrite the current codes with the new codes. Select Cancel to cancel the operation.

CMUG00092W This operation applies the activation codes to the storage image. Select OK to apply the activation codes. Select Cancel to cancel the operation.

Explanation

You are being asked to confirm that you want to apply the activation codes to the selected storage image.

Action

Select OK to apply the activation codes. Select Cancel to cancel the operation.

CMUG00093E You must add at least one host attachment to the storage image.

Explanation

Before information about your newly defined host can be saved, you must add at least one host attachment to the storage image.

Action

Add at least one host attachment, and then resubmit the task.

CMUG00094E Unable to attach host. No I/O port is selected.

Explanation

You have selected a host to attach to an I/O port, but no I/O port is selected from the table.

Action

Select an I/O port from the table of available ports, and then resubmit the task.

Chapter 3. DS Storage Manager messages 87