TRENDnet TEW-MFP1 manual Change device IP address, Change Device Information

TRENDnet User’s Guide

•PBC

oMode: Select PBC

oClick Trigger to initialize WPS

oInitiate WPS Push Button on your wireless router or access point

•PIN

oMode: Select PIN

oSSID: Enter the SSID of your WPS wireless router or access point o PIN: Select if you want the PIN to Random Generate or Manually

Generate the PIN key

o Set PIN: Press to apply the entered PIN key

o Default PIN: Press to return PIN key back to default settings o Click Trigger to initialize WPS

o Enter the device’s PIN key on your wireless router or access point

Change device IP address

General

Bydefault the device is set to Automatic/DHCP. This setting allows the device to automatically obtain an IP address from your network. However you can statically assign an IP address to the device.

Note: The IP address must be in the same subnet as your network. Incorrect settings may cause issues.

1.Log into your router management page (see “Access your router management page” on page 13).

2.Click on General tab and scroll down to the TCP/IP section.

TEW-MFP1

3.Select Static IP

4.Enter the IP address and Subnet Mask settings.

5.Click Apply to save settings.

Change Device Information

General

In most cases, you do not need to change the device information and the default settings are just fine. However you can customize these settings to match your network. These settings help you determine or find the device from features like Windows Network Map or a router’s client list.

•Server Name: The device name described on your network

•Workgroup: The work group assigned to the device

•Description: The product descript of the device

1.Log into your router management page (see “Access your router management page” on page 13).

2.Click on General tab and scroll down to the Device Information section.

3.Enter the updated device information

4.Click Apply.

© Copyright 2012 TRENDnet. All Rights Reserved.

16