Troubleshooting

TRENDnet User’s Guide

Q Q: I typed http://192.168.10.100 in my Internet Browser Address Bar, but an error message says “The page cannot be displayed.” How can I access the printer server’s management page?

Answer:

1.Check your hardware settings again. See “Network Installation” on page 4.

2.Make sure the Power and LAN lights are lit.

3.Make sure your network adapter TCP/IP settings are set to Obtain an IP address automatically or DHCP (see the steps below).

4.Press on the factory reset button for 15 seconds, the release.

Windows 7

a. Go into the Control Panel, click Network and Sharing Center.

b. Click Change Adapter Settings, right-click the Local Area Connection icon. c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4). d. Then click Obtain an IP address automatically and click OK.

Windows Vista

a. Go into the Control Panel, click Network and Internet.

b. Click Manage Network Connections, right-click the Local Area Connection icon and click Properties.

c. Click Internet Protocol Version (TCP/IPv4) and then click Properties. d. Then click Obtain an IP address automatically and click OK.

Windows XP/2000

a. Go into the Control Panel, double-click the Network Connections icon b. Right-click the Local Area Connection icon and the click Properties. c. Click Internet Protocol (TCP/IP) and click Properties.

d. Then click Obtain an IP address automatically and click OK.

Note: If you are experiencing difficulties, please contact your computer or operating system manufacturer for assistance.

TEW-MFP1

Q:How can I verify if my wireless router or access point supports Wi-Fi Protected Setup (WPS) Push Button Configuration (PBC)?

Answer:

1.Check the product specifications of your wireless router or access point.

2.Contact your wireless router or access point technical support.

Q:Can I use Wi-Fi Protected Setup PIN Configuration and not Push Button Configuration (PBC).

Answer:

1.No, the TEW-MFP1 only supports Wi-Fi Protected Setup (WPS) Push Button Configuration (PBC).

Q:The utility cannot find my print server. What should I do? Answer:

1. Make sure your router and your wireless network is properly working.

2. Verify that your computer is properly connected to your network.

2. Make sure that the print server is turned on and is connected to your network

3. Close the utility and re-open it

Q:I cannot print to my printer. What should I do?

Answer:

1.Make sure that all drivers and software that is provided with your printer are installed on your computer. Please note these drivers and software are required to be installed on computers that will be using the printer behind the print server.

2.Verify that the printer is working.

3.Power cycle the printer and print server. Close and re-open the utility.

Q:I cannot find my USB device connected to the print server. What should I do? Answer:

1. Make sure that all drivers and software that is provided with your USB device installed on your computer. Please note these drivers and software are required to be installed on computers that will be using the printer behind the print server.

2. Verify that the USB device is properly working and connect it directly to your computer.

3. Power cycle the printer and print server. Close and re-open the utility.

Q:Can I connect a USB Hub to the print server to add additional USB devices? Answer:

1-Port Wireless N Multi-Function USB Print Server, TEW-MFP1 specifications

The TRENDnet TEW-MFP1 is a versatile 1-Port Wireless N Multi-Function USB Print Server that allows users to integrate USB printers and multi-function devices into a wireless network with ease. This device is particularly suited for home offices or small businesses that require seamless printing capabilities from multiple devices, including computers and mobile devices.

One of the standout features of the TEW-MFP1 is its support for Wireless N technology, which delivers high-speed wireless performance of up to 300 Mbps. This ensures that print jobs are transferred quickly and efficiently, reducing wait times when sending documents from a PC or laptop to the printer. The device operates over a 2.4 GHz frequency, which is widely supported by most wireless routers, making it easy to implement in various network environments.

The print server is equipped with a USB 2.0 port, allowing users to connect a variety of USB printers and multi-function devices. This functionality promotes shared printing without the need for additional cables or direct connections to a computer. As a multi-function device, the TEW-MFP1 supports printing, scanning, and faxing, making it an essential tool for any office setup.

Another notable characteristic of the TEW-MFP1 is its user-friendly setup process. The device can be configured quickly through a web interface, ensuring that even users with limited technical knowledge can establish the print server without any complications. Furthermore, the print server is compatible with various operating systems, including Windows, macOS, and Linux, which adds to its flexibility.

The TRENDnet TEW-MFP1 also features robust security protocols, including WEP, WPA, and WPA2 encryption, ensuring that sensitive documents are safely transmitted over the network. Additionally, it supports the use of IP filtering, which enables administrators to manage access control effectively.

In summary, the TRENDnet TEW-MFP1 Multi-Function USB Print Server is a reliable solution for those looking to enhance their printing capabilities within a wireless environment. With its combination of Wireless N technology, support for multi-function devices, easy setup, and robust security features, it is well-suited for both personal and professional use. By streamlining the printing process and eliminating the need for physical connections, the TEW-MFP1 is an excellent investment for anyone seeking to improve workplace efficiency.