SATO 8400RVe manual Print Head Balance Adjustment

Major Adjustment

Required equipment “+”Screw-driver (JIS No.2 equivalent)

STEPS

1Loosen the set screw.

2Turn the adjust screw to make adjustment.

3If the front side of label is too light, turn the screw in clockwise direction.

4If the front side of label is too dark, turn the screw in counter-clockwise direction.

Turn the adjust screw in clockwise or in counter-clockwise direction depending on the situation

Loosen the set screw

EZ Manual: M-8400RVe 9

Print Head Balance Adjustment

<previous home next >

Barcode SATO International Pte Ltd