![](/images/new-backgrounds/1170122/17012235x1.webp)
7.3 Inserting ribbon
Fig. 9 Inserting ribbon, front
Fig. 10 Inserting ribbon, side
Fig. 11 Inserting ribbon, front
GL408e / GL412e Barcode Thermal Printer
Setup and initial operation
1.Open the media cover (1).
2.Install the ribbon
NOTE!
One ribbon
3.Push the ribbon roll (4) on the ribbon supply spindle (5) against the stopper.
4.Open the print head assembly by using the print head latch
(6). The pivoting deck (7) swings upwards.
5.Thread the end of the ribbon (8, alternative 9) under the ribbon guide rollers (10) between the platen (11) and the print head (12).
6.Thread the ribbon between ribbon
NOTE!
Do not attach the ribbon to the ribbon
7.Manually rotate the ribbon
8.Close the print head assembly.
9.Close the media cover.
15