SATO MB200 manual DIP Switch 2 DSW2

6

Starting the Printer

DIP Switch 2 (DSW2)

Switch	Function	Initial Factory
No.		Default Setting
2-1	Use when specifying printer ID number.	DSW2-1
	* Unless directed otherwise, do not	OFF
2-2	change the setup.	DSW2-2
	* Command specification is available for	OFF
2-3	printer ID number.	DSW2-3
		OFF
2-4		DSW2-4
		OFF
2-5		DSW2-5
		OFF
2-6		DSW2-6
		OFF
2-7		DSW2-7
		OFF
2-8	Unavailable for use	DSW2-8
		OFF

•Make sure the power is turned off before setting up the DIP Switch.

DIP Switch 3 (DSW3)

Unavailable for use

•Make sure the power is turned off before setting up the DIP Switch.

* Unless directed otherwise, do not change the setup.

PN9001122 Page 34