TRENDnet TEW-310APB manual LED Indicators

Page 6

LED Indicators

LED stands for Light-Emitting-Diode. The TEW-310APB has three LEDs:

Power

Link

TX/RX

Fig. 2.2

Power - Solid red light indicates receiving power

TX/RX (Wireless Network) - Solid green light indicates wireless connection enabled, blinking green indicates wireless network activity

Link (Ethernet Port) - Solid green light indicates good Ethernet connection on the RJ-45 port, blinking green indicates Ethernet port activity

6

Image 6

Contents TEW-310APB Contents Package Contents Introduction ConnectionsFeatures and Benefits LED Indicators Wireless Basics TRENDware Wireless Family of LAN products include Installation ConsiderationsStandards Based Technology Page Getting Started IP AddressSetting Up an Infrastructure Network Using the Configuration Menu Factory Default Setting for the TEW-310APBConfiguration Menu ∙ Type admin in the User Name field Status Screen with Menu BarBasic Settings Channel WEP Key Mode PassphraseAP name Automatically . Or you can IP SettingsPlease note that only one key can be activated at a time Subnet Mask , and Gateway byAdvanced Settings AP ModeAuthentication Type 802.1X SecurityTools Troubleshooting Based on Windows XP Operating SystemGateway Address ∙ Click Properties ∙ Select the Hardware Tab ∙ Click Device ManagerAdapters Cardbus AdapterResetting the TEW-310APB to Factory Default Settings Using the Network Setup Wizard in Windows XP Networking BasicsPage Enter a Computer description and a Computer name Workgroup namePage Page Page Page Naming your Computer Windows XPGo to Start All Programs Accessories Command Prompt Checking the IP Address in Windows XP/2000Address Assigning a Static IP Address Control PanelNetwork Connections Connections ∙ Click Properties You have completed the assignment of a Static IP Address Internet Protocol TCP/IP click Properties Connecting to a Wireless Network in Windows XPNetwork Connection ∙ Select Obtain an IP addressConnecting to a Wireless Network in Windows ∙ Select Use the following IP address ∙ Go to Start Settings Control Panel Double-click Select Internet Protocol TCP/IP click Properties∙ Select Detect connection to network media Checking the Wireless Connection by Pinging ∙ Select Specify an IP addressFile and Printer Sharing Technical Specifications Temperature DimensionsWeight HumidityContacting Technical Support