TRENDnet TE100-MP1U, TEW-MP2U Print Server wireless configuration is now complete, Cllick Close

Page 9

5. Cllick Close.

6.Unplug the power to the Print Server, disconnect the Ethernet cable to the Print Server, wait 15 seconds, then plug power to the Print Server back in.

7.Verify the WLAN LED is lit on the Print Server.

Print Server wireless configuration is now complete.

For detailed information regarding the TEW-MP2U configuration and advanced settings, please refer to the User's Guide on the Utility CD-ROM or TRENDnet's website at www.trendnet.com

Register Your Product

To ensure the highest level of customer service and support, please take a moment to

register your product Online at: www.TRENDnet.com/register

Thank you for choosing TRENDnet

7

English

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Quick Installation Guide Table of Contents System Requirements Before You StartTEW-MP2U ApplicationHow to Connect Configure the Print Server Print Server configuration is now complete Configure Wireless Settings TEW-MP2U only Cllick Close Print Server wireless configuration is now completeSetup for Auto Connect Printing PrintingSet AutoConnect Printer English Faxing ConnectDisconnect Scanner ScanningServer Mode Selecting ModeStorage Click Network StorageNetUSB Mode Troubleshooting Now I cannot go into the print server’s web utility Certifications Product Warranty Registration
Top Page Image Contents