TRENDnet TE100-MP2U, TE100-MP1U, TEW-MP2U manual How to Connect

Page 5

2.How to Connect

1.Install the printer drivers to your computer. Then shutdown the printer and disconnect the printer from your computer.

Note: Please refer to your printer's manual for printer installation instructions.

2.Connect the Power Adapter to the Print Server and then to a power outlet.

3.Connect a RJ-45 network cable from a Switch/Router to the LAN port of the Print Server.

4.Connect the USB Printer to the USB port of the Print Server.

5.Power ON printer.

6.Verify the Power, Link and USB1 or USB2 LEDs are lit on the Print Server.

3

English

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Quick Installation Guide Table of Contents System Requirements Before You StartTEW-MP2U ApplicationHow to Connect Configure the Print Server Print Server configuration is now complete Configure Wireless Settings TEW-MP2U only Cllick Close Print Server wireless configuration is now completeSet AutoConnect Printer Setup for Auto Connect PrintingPrinting English Disconnect FaxingConnect Scanner ScanningServer Mode Selecting ModeStorage Click Network StorageNetUSB Mode Troubleshooting Now I cannot go into the print server’s web utility Certifications Product Warranty Registration
Top Page Image Contents