Configuration

connectors on each end. Be sure to use the end of the cable that mates with the USB ports on the base unit. Connect the other end of the USB cable to the AIRcable Bluetooth transmitter.

Connect the provided antenna to the RP-SMA jack on the AIRcable Bluetooth transmitter. Be sure to screw the antenna onto the RP-SMA connector snuggly by hand. Do not over-tighten.

To avoid damaging the transmitter, never operate the unit without the antenna connected.

If using an optional FM transmitter, connect the mini-stereo plug from the FM transmitter to the audio output jack on the front of the base unit. Plug the transmitter’s power converter into a standard 120V power outlet. The transmitter can be turned on and off using the power switch located on the top of the transmitter, and the desired transmit frequency set using the tuning buttons on the top of the transmitter.

Connect the DC power cord to the power jack on the back panel of the base unit. This power cord has a latching mechanism and the barrel on the end of the cable must be pulled back to release the latch. Plug the base unit’s power converter into a standard 120V power outlet.

Put the power switch on the rear panel of the base unit in the ON position. The power switch on the front of the unit can now be used to turn the unit on and off as necessary.

The base unit will take approximately 1 minute to boot. A series of two tones with a rising frequency will be played to indicate the unit is ready to send flyers.

Begin by using the provided Windows application to create flyer file sets, audio recordings, and for selecting the BlueFlyers’ operating mode. Follow the application’s instructions for storing files and configuration information on the USB flash drive. Use of the application is described in the software section of this manual.

Once the proper files are stored on the USB flash drive, the flash drive is ready to be used to configure the BlueFlyers unit. Plug the USB flash drive into any available USB port on the base unit, and turn on the unit’s power. After booting, the files will be copied to the unit. A single long beep (1 second) will be played to indicate the files have been copied. This will occur before the two tone series that indicates the unit is ready to send flyers.

R91007G specifications

The TRENDnet R91007G is an advanced wireless router designed for both home and small office environments, providing high-speed internet connectivity with a range of innovative features. This device stands out in the competitive market of networking equipment, focusing on performance, reliability, and user-friendly operation.

One of the key features of the TRENDnet R91007G is its dual-band technology. Operating on both the 2.4GHz and 5GHz frequency bands, this router can deliver speeds of up to 1300 Mbps on the 5GHz band and 400 Mbps on the 2.4GHz band. This dual-band capability allows users to connect multiple devices without experiencing significant drops in performance, making it ideal for streaming, gaming, and browsing.

Security is another critical aspect of the R91007G. It supports advanced wireless security protocols such as WPA3, ensuring that your network and sensitive information remain protected from unauthorized access. The router also features a robust firewall and supports VPN passthrough capabilities, giving users the tools to create secure connections when working remotely.

One innovative technology included in the TRENDnet R91007G is MU-MIMO (Multi-User, Multiple Input, Multiple Output). This technology allows the router to communicate with multiple devices simultaneously, reducing lag and improving overall network efficiency. As a result, households and small offices with numerous connected devices can enjoy a smoother experience, even during peak usage times.

The device also features four Gigabit Ethernet ports, enabling wired connections to desktop computers, gaming consoles, and other devices that benefit from enhanced stability and speed. This versatility is crucial for users who require a reliable connection for bandwidth-intensive tasks.

Another noteworthy characteristic of the TRENDnet R91007G is its user-friendly interface. The router can be easily set up and managed through a web-based interface or a mobile app, making it accessible for users of all technical backgrounds. Additionally, it supports Quality of Service (QoS) settings, which allow for prioritization of internet traffic, ensuring that important tasks receive the necessary bandwidth.

In summary, the TRENDnet R91007G is a feature-rich wireless router that caters to the needs of modern users, providing high-speed connectivity, robust security features, and enhanced user experience. Whether for home or small business use, this router is designed to meet the demands of a connected world. With its advanced technologies and thoughtful design, the TRENDnet R91007G stands as a reliable choice in today's networking landscape.