Teac X-03SE Analog audio output terminals, Digital audio output terminals, Word sync connector

Page 9

AAnalog audio output terminals

Use either the XLR or RCA (pin) terminals for analog stereo output.

XLR: Use balanced XLR audio cable

RCA: Use RCA (pin) audio cable

<When using these terminals, set the Analog Out setting to “2ch” (or select “2ch” using the 2CH/MULTI button of the remote control unit) to downmix the multi-channel material to two channels.

Note that if the Analog Out setting is set to “Multi ch”, only the front L/R sound of the multi-channel material will be output from these terminals.

BDigital audio output terminals

Digital audio from CD is output from these terminals.

The unit may be connected using either coaxial or optical (TOS) commercially available cables to amplifiers, or to digital audio devices such as CD recorders, etc.

COAXIAL: Use RCA (pin) digital audio cable

OPTICAL: Use optical digital audio cable (TOS)

<The optical terminal is covered by a shutter. Make sure that the cable is firmly inserted, but do not force the cable when connecting it or removing it, in order not to cause damage to the unit.

<The DIGITAL OUT terminals cannot output the digital audio from Super Audio CDs.

Ci.LINK (AUDIO) terminal

In addition to the digital audio from CD, the digital surround audio from Super Audio CDs can be output from this terminal.

Use a commercially available S400 compatible i.LINK (IEEE1394) 6pin cable to connect the unit to an amplifier.

<When using this terminal, set the i.LINK output setting to “i.60958” or “i.PCM” (see page 19).

<See page 20 for further details on i.LINK.

<To enjoy surround sound from a Super Audio CD, connect the i.LINK (AUDIO) terminal to a suitably equipped surround sound amplifier.

DWord sync connector

This allows the use of an externally-generated word clock connection, using a commercially available BNC coaxial cable.

Devices producing such a suitable clock signal include external D-A converters, or dedicated word clock generators. Connect the SYNC OUT (or WORD OUT) of such a device to the unit.

ESIGNAL GND connection

Use a commercially available PVC-covered cord to connect the signal ground terminal on the unit to the amplifier signal ground.

<Note that this is NOT an electrical safety ground (earth).

FPower cord receptacle

After all other connections have been made, insert the supplied AC power cord into this receptacle, then connect the other end of the power cord into the wall socket. Ensure that your AC voltage corresponds to the voltage marked on the rear panel of the unit. Consult a qualified electrician if you are in doubt.

<In order to avoid the risk of electric shock, fire, and so on, only use the supplied power cord.

<If you are not going to use the unit for some time, disconnect the power cord from the wall socket.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Super Audio CD/CD Player For U.S.A Important Safety InstructionsContents Coreless motor with neodymium magnets FeaturesAudio DACs Unsurpassed design and featuresWord synchronization Link Audio terminalBefore Use Placement of the unitWhat’s in the box Conventions about this manualDiscs Type of discs that can be played on this systemFollowing discs cannot be played with this unit Stereo amplifier ConnectionsMaster clock generator G-0s, etc Digital audio device CD recorder, MD deck, etc Wall socketSignal GND connection Word sync connectorPower cord receptacle Analog audio output terminalsDisplay Front panel featuresUnderstanding the remote control unit Restoring factory settings Remote Control UnitHow to insert the batteries Battery ReplacementPlayback Pausing playbackStopping playback Opening and closing the traySelecting a track Skipping playbackFast scanning Selecting the playback areaAnalog output 2CH/MULTI Repeat modeTrack repeat Disc repeatFinish the programming by pressing Play Programmed playbackDisplay dimming Use the FL Dimmer button to cycle between these settingsClearing the last track from the list Adding tracks to the listClock Mode Changing the display modeOFF default Link Audio Output Setting60958 PCMLink Ieee How to connect multiple i.LINK-capable devicesCopyright protection system Dtcp Data transfer rateSettings introduction Exit the setup menu by pressing Setup once moreUse the cursor buttons to navigate the menus Settings Setup Menu Chart Settings Speaker Setup Settings Audio SetupSpeaker levels SP Level Speaker distanceTest tone length Test tone Select Test Start and press the Enter buttonTroubleshooting MaintenanceBeware of condensation Specifications Dimensions Teac Esoteric Company

X-03SE, X-03 specifications

The Teac X-03 and X-03SE represent a significant evolution in high-fidelity audio playback, catering to enthusiasts who demand the utmost in sound quality and versatility. These models showcase Teac's commitment to excellence, featuring both innovative design and advanced technology.

At the heart of the X-03 and X-03SE lies their impressive digital-to-analog conversion capabilities. Equipped with premium AKM AK4490EQ DAC chips, these units deliver remarkable audio performance, ensuring that every note and nuance of your favorite music is rendered with crystal clarity and dynamic range. The X-03SE model further enhances this performance with improved component selections and enhanced circuitry, resulting in even greater audio fidelity.

One of the standout features of both the X-03 and X-03SE is their support for a wide array of audio formats. Users can enjoy high-resolution audio playback, with capabilities for DSD files and PCM resolutions up to 32-bit/768kHz. This flexibility allows audiophiles to fully engage with their digital music libraries, ensuring compatibility with modern and legacy formats alike.

The build quality of the X-03 and X-03SE is exemplary, featuring robust chassis designs that minimize external vibrations and interference. Their aesthetically pleasing design includes a user-friendly front panel with a high-contrast display, which provides essential information at a glance. The remote control enhances user experience by granting easy access to all functions from a distance.

Connectivity options are comprehensive, making integration into existing audio systems seamless. The rear panel includes both balanced XLR and unbalanced RCA outputs, as well as digital inputs like USB, coaxial, and optical. This versatility allows the X-03 and X-03SE to serve as central hubs in high-end audio setups, accommodating a variety of source devices.

Advanced features such as a high-quality headphone amplifier and network capabilities further elevate the listening experience. Users can stream music directly from their devices, harnessing the power of modern technology without sacrificing audio quality.

In conclusion, the Teac X-03 and X-03SE are designed for discerning listeners who appreciate the fusion of cutting-edge technology and timeless craftsmanship. With their exceptional sound quality, versatile formats, and robust connectivity options, these models are poised to satisfy even the most demanding audiophile. Whether for critical listening in a dedicated studio or relaxed enjoyment at home, the X-03 series stands as a testament to Teac's legacy in the world of high-fidelity audio.
Top Page Image Contents