TRENDnet Series 300 manual Electrical Operation

Page 7

INSTALLATION (continued)

press this button

Florham Park NJ 07932 USA

TRANSFER SWITCH TEST

BYPASS TIME DELAY SET ENGINE EXERCISER

Press for 15 Seconds

Press until light FLASHES

observe these lights

Figure 1–6. Standard controls and indicators.

3 – Electrical Operation

First check nameplate on transfer switch; rated voltage must be the same as normal and emergency line voltages.

!

Verify that the feeders have been connected to the proper lugs.

Use extreme caution when using a meter to measure voltages in the following steps. Do not touch power terminals; shock, burns, or death could result !

Perform steps 1 through 8 at the right. Observe the status lights. See Figure 1–6.

●Black circle means light is on. ❍ White circle means light is off.

NOTE: If Motor Load Transfer feature is activated, then transfer may not occur immediately after the respective time delays. Transfer will only occur when the phase relationship between sources is correct.

This completes the Functional Test of the ASCO Series 300 Automatic Transfer Switch. Leave the engine–generator starting control in the automatic position.

The normal source must be

 

available and the generator

 

1 must be ready to start.

 

Check that the Normal Source

 

Available light is on.

 

Press and hold the Transfer

TRANSFER SWITCH TEST

2Switch Test button until the engine starts and runs. This should happen within 15 sec.

3The Emergency Source Available light should come on.

The transfer switch should transfer to the Emergency

4position. The Load Connected to Emergency light should come

on and the Load Connected to Normal light should go off.

If the transfer to emergency

 

delay is used the transfer

BYPASS TIME DELAY

5should occurs after a time delay (up to 5 minutes).

For immediate transfer press the Bypass Time Delay button.

The transfer switch should transfer back to the Normal

6position. The Load Connected to Normal light should come on

and the Load Connected to Emergency light should go off.

If the retransfer to normal delay

 

is used the retransfer should

BYPASS TIME DELAY

7occur after a time delay (up to 30 minutes).

For immediate retransfer press the Bypass Time Delay button.

The unloaded running delay keeps the generator running for

85 minutes (cool–down period). Then the generator should stop

and the Emergency Source Available light should go off.

1--5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operator’s Manual 1000 1200 1600 2000 2600 3000 Nameplate Catalog Number IndentificationInstallation Auxiliary Circuits Source fails Transfer switchController Ground Engine Starting ContactsATS Position Indicators Installation Functional TestManual Operation Test Black circle means light is on InstallationUse a phase rotation meter to Voltage ChecksElectrical Operation Transfer To Emergency Sequence of OperationPreventive Maintenance Testing & ServiceManual Load Transfer Testing & ServiceTROUBLE-SHOOTING Proceed with care Automatic transfer switch is energizedTime Delay Settings AdjustmentsTime Delay Adjustment Sensor AdjustmentsHow to Change a Setting AdjustmentsClose the enclosure door Step Function Explanation Push Button Status Light DIP Switch SettingsHow to Set Built-In Timer BUILT-IN Engine ExerciserOptional Programmable Engine Exerciser Accessory 11CD Control FeaturesProgramming Engine On-Off Periods Setting the Clock Time and DayCanceling Time Programs Changing or Checking Time ProgramsLoad Disconnect Feature Inphase Monitor For Motor Load TransferControls Strip Heater AccessoryIndex

Series 300 specifications

TRENDnet Series 300 is a powerful lineup of networking devices designed to deliver robust performance and high-speed connectivity for various applications. With its focus on both home and small office environments, the Series 300 incorporates advanced technologies to ensure seamless connectivity and enhanced network management.

One of the primary features of the TRENDnet Series 300 is its support for the latest wireless standards. Equipped with 802.11ac technology, these devices provide significant improvements in speed and range compared to previous generations. Users can experience wireless speeds up to 1300Mbps, making it ideal for streaming high-definition content, online gaming, and large file transfers.

Additionally, the Series 300 boasts dual-band capabilities, allowing users to connect to both 2.4GHz and 5GHz frequency bands. This flexibility helps to reduce interference and ensures stable connections for multiple devices simultaneously. The dual-band feature is particularly beneficial in crowded environments, where numerous devices compete for bandwidth.

Security is paramount in any networking solution, and TRENDnet Series 300 devices offer robust security protocols to safeguard users' data. With support for WPA/WPA2 encryption, users can ensure their wireless networks are protected against unauthorized access. Furthermore, many models in this series integrate advanced security features such as a built-in firewall and guest network options, providing an extra layer of protection.

Another notable characteristic is the intuitive user interface, which simplifies the setup and management of network configurations. Users can easily access and modify settings through a user-friendly web interface or a mobile application. This ease of management makes it accessible even for users with limited technical expertise.

The Series 300 is also designed with versatility in mind, featuring multiple Ethernet ports for wired connections. This is beneficial for devices that require a stable network connection, such as gaming consoles and smart TVs. Additionally, Power over Ethernet (PoE) capabilities allow the devices to power compatible network devices, reducing cable clutter.

Finally, TRENDnet's commitment to reliability is evident in the build quality of the Series 300. These devices are engineered for long-lasting performance and efficiency, making them a trustworthy choice for both personal and professional networking needs. Overall, the TRENDnet Series 300 series stands out as a comprehensive networking solution, incorporating speed, security, and ease of use into its design.
Top Page Image Contents