TRENDnet TEW P21G Configuration J Wireless, Wireless Interface, WEP Encryption, Advanced Setting

Page 20

Configuration J Wireless

Wireless Interface

-Connection Mode: Select one of the three connection modes.

Infrastructure (default) - Connects to compatibly configured wireless AP or router in a WLAN.

Ad-Hoc - Connect to compatibly configured wireless clients in the peer-to-peer mode.

-SSID: Assign the SSID in this box. You can manually input the name or select one from the pull-down menu. To search the

-39 -

available wireless AP within the network, click the Site Survey button.

-Wireless Channel: Select the channel from the pull-down menu. The default setting is 11.

-Transmission Rate: Select the data transmit rate from the pull- down menu. The default setting is Fully Automatic.

WEP Encryption

This field allows you to configure the settings of data encryption. Please remember that the WEP key must be set before the data encryption is enforced.

-WEP Encryption: This option allows you to select Disable, 64 bits, and 128 bits for the encryption setting.

-WEP Key Format: You can decide the network key to be encoded by ASCII (ASCII characters) or HEX (hexadecimal digitals).

Then, enter the key(s) for the network in the Key box (1~4).

Advanced Setting

This field allows you to configure more settings, including:

-Beacon Interval: Enter the number of beacon interval time in millisecond.

-Preamble: This option allows you to set the length of preamble.

Setting options are: Long - it is set to 144 bits; Short - it is set to 72 bits.

-Authentication Type: You can set the authentication type by

selecting the settings: Open System, Shared Key, and Both.

TIP:Once you have changed the settings in each option, click Save to store the settings, or Cancel to abandon.

- 40 -

Image 20
Contents Table of Contents WEB Configuration About this GuideSystem Requirements Package ContentsIntroduction General Features Product ViewHardware Installation Networking ApplicationAuto-Run Installation Using the UtilitiesInstalling the Print Server Installing PS-Utility PS-UtilityUsing PS-Utility Control ButtonsPS Wizard Choose one connected printer within the network Printing in MAC OS Rendezvous Uses in MAC OSSetting Up Apple Talk/LPR Printing For MAC OS X UserSelect Edit Printer List from the Printer dialog box For MAC OS 9 User To print from MAC OS Client WorkstationsWEB Configuration Web Configuration UtilityManagement Management J SystemDevice Status Printer StatusManagement J Network Management J WirelessWireless Status Management J User Configuration Configuration J SystemPort Settings System DeviceConfiguration J Wireless Wireless InterfaceAdvanced Setting WEP EncryptionAppleTalk Configuration J NetworkMicrosoft Network Configuration J User Printing ControlDefine Users Mail AccountConfiguration J Snmp Mail NotificationMail Printing Snmp ManagementTool J E-mail ToolsTool J Print Test Tool J Reset Tool J Factory ResetReset Factory ResetTool J Firmware Upgrade Firmware UpgradeBackup Device Configuration to File Restore Device Configuration from FileProduct Specifications HelpPrinter Connection Network ConnectionNetwork Protocol Support HardwareOperating System Support ManagementLimited Warranty Technical Support