TRENDnet User’s Guide
•PIN (Personal Identification Number) Method - located in router management page Note: Refer to your wireless device documentation for details on the operation of WPS.
Recommended Hardware Push Button (PBC) Method
•Note it is recommended that a wireless key (passphrase or password) is created before connecting clients using the PBC method. If no wireless key is defined when connecting via PBC, the router will automatically create an encryption key that is 64 characters long. This 64 character key will then have to be used if one has to
connect computers to the router using the traditional connection method.
To add a wireless device to your network, simply push the WPS button on the wireless device you are connecting(consult client device User’s Guide for length of time), then push and hold the WPS button located on your router for 3 seconds and release it. A blue LED on your router WPS button will flash indicating that the WPS setup process has been activated on your router. (See “Product Hardware Features” on page 5)
For connecting additional WPS supported devices, repeat this process for each additional device.
PBC (Software/Virtual Push Button)
Wireless >WiFi Protected Setup
In addition to the hardware push button located physically on your router, the router management page also has push button which is a software or virtual push button you can click to activate WPS on your router.
1.Log into your router management page (see “Access your router management page” on page 26).
2.Select the wireless band you would like to configure and click on WPS.
3.To add a wireless device to your network, simply the push the WPS button on the wireless device (consult wireless device’s User’s Guide for length of time), you are
TEW-812DRU
connecting, then in your router management page under WPS action click on the Add Enrollee button.
PIN (Personal Identification Number)
Wireless >WiFi Protected Setup
If your wireless device has WPS PIN (typically an
1.Log into your router management page (see “Access your router management page” on page 26).
2.Select the wireless band you would like to configure and click on WPS.
3.Next to Station PIN, enter the WPS PIN of the wireless device you are connecting and click the Add Enrollee button.
Note: You may need to initiate the WPS PIN on your wireless device first when using this method. Refer to your wireless device documentation for details on the operation of WPS.
Wireless 2.4GHz wireless settings
2.4GHz Wireless > Basic
This section outlines available management options for your router’s 2.4GHz wireless network.
1.Log into your router management page (see “Access your router management page” on page 26).
2.Click on Wireless 2.4GHz and click on Basic.
© Copyright 2013 TRENDnet. All Rights Reserved.
17