TRENDnet User’s Guide |
2.Click Connect to connect your computer to the scanner.
3.Once your computer is connected, you can receive scanned files from the scanner.
4.After you have finished printing, click Disconnect, to make the scanner available to other computers on your network that use the scanner.
Router Maintenance & Monitoring
Reset your router to factory defaults
Administrator > Settings Management
You may want to reset your router to factory defaults if you are encountering difficulties with your router and have attempted all other troubleshooting. Before you reset your router to defaults, if possible, you should backup your router configuration first, see “Backup and restore your router configuration settings” on page 48.
There are two methods that can be used to reset your router to factory defaults.
•Reset Button – Located on the side panel of your router, see “Product Hardware Features” on page 5. Use this method if you are encountering difficulties with accessing your router management page.
OR
•Router Management Page
1.Log into your router management page (see “Access your router management page” on page 26).
2.Click on Administrator and click on Settings Management.
3.Under Load Factory Default, click Load Default. When prompted to confirm this action, click OK.
Router Default Settings
Administrator User Name | admin |
Administrator Password | admin |
Router IP Address | 192.168.10.1 |
Router Subnet Mask | 255.255.255.0 |
DHCP Server IP Range | |
Wireless 2.4GHz | Enabled |
Wireless 2.4GHz Encryption | Please refer to wireless sticker or |
| device label |
Wireless 5Ghz | Enabled |
Wireless 5GHz Encryption | Please refer to wireless sticker or |
| device label |
|
|
© Copyright 2013 TRENDnet. All Rights Reserved.
47