TRENDnet TEW731BR manual Set up Dhcp reservation

Page 34

TRENDnet User’s Guide

•Domain Name (Optional) – Specifies a domain name to assign to computers or devices. (e.g. trendnet.com)

•Lease Time – Click the drop-down list to select the lease time.

Note: The DHCP lease time is the amount of time a computer or device can keep an IP address assigned by the DHCP server. When the lease time expires, the computer or device will renew the IP address lease with the DHCP server, otherwise, if there is no attempt to renew the lease, the DHCP server will reallocate the IP address to be assigned to another computer or device.

4. To save changes, click Apply.

Dynamic DHCP List – You can view the list of active lease entries for computers or devices that have been assigned IP addresses automatically from the DHCP server on your router.

TEW-731BR

Set up DHCP reservation

Main > LAN & DHCP Server

DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows your router to assign a fixed IP address from the DHCP server IP address range to a specific device on your network. Assigning a fixed IP address can allow you to easily keep track of the IP addresses used on your network by your computers or devices for future reference or configuration such as virtual server (also called port forwarding, see “Virtual Server” on page 35) or special applications (also called port triggering, see “Special Applications” on page 36).

1.Log into your router management page (see “Access your router management page” on page 27).

2.Click on Main, and click on LAN & DHCP Server.

3.Review the DHCP reservation settings.

•Static DHCP– Enable or Disable the DHCP reservation feature.

•Name – Enter a name for the reservation.

•IP Address – Enter the IP address to assign to the reservation. (e.g. 192.168.10.101)

Note: You cannot assign IP addresses outside of the DHCP range. The IP address is required to be within the DHCP IP address range (Start IP & End IP).

•MAC Address – Enter the MAC (Media Access Control) address of the computer or network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)

•Add - Saves the reservation.

© Copyright 2012 TRENDnet. All Rights Reserved.

31

Image 34

Contents Page Contents Table of Contents Features Package ContentsProduct Overview Product Hardware Features Rear ViewFront View Application Diagram Side ViewHow to setup your router Basic Router SetupHow to set up a home network Where to find more helpRouter Installation Hardware Installation Setup Wizard Wireless LAN Select Enable for Wireless LAN Click Restart and wait for your router to reboot Connect additional wired devices to your network Wireless Networking and Security Wireless Encryption TypesSecure your wireless network Selecting WPA, WPA-Auto, or WPA2 WPA2 recommended Selecting WEPKey Then from the PSK/EAP row, select either PSK or EAPConnect wireless devices to your router Recommended Hardware Push Button PBC Method Connect wireless devices using WPSWireless WiFi Protected Setup PBC Software/Virtual Push ButtonPIN Personal Identification Number Basic wireless settings Wireless BasicSsid Broadcast Steps to improve wireless connectivity Advanced wireless settings Wireless AdvancedAccess Filter Access Control FiltersAccess control basics Access Filter MAC FiltersAccess Filter Domain/URL Blocking Domain/URL FiltersAccess Filter Protocol/IP Filters Protocol/IP filtersAccess Firewall Rule Firewall rulesTEW-731BR Change your router login password Advanced Router SetupAccess your router management Main PasswordMain Time Manually configure your Internet connectionSet your router date and time Main WANClone a MAC address Change your router IP address Set up the Dhcp server on your routerMain LAN & Dhcp Server Set up Dhcp reservation Management Remote Management Enable/disable UPnP on your routerAllow/deny VPN connections through your router Click on Management, and click on Remote ManagementIdentify your network on the Internet Allow/deny multicast streamingMain Dynamic DNS Access DMZ Allow remote access to your router managementOpen a device on your network to the Internet Access Virtual Server Virtual ServerExample To forward TCP port 80 to your IP camera Access Special AP Special ApplicationsAdd static routes to your router Routing StaticEnable dynamic routing on your router Routing DynamicTEW-731BR Router Default Settings Router Maintenance & MonitoringReset your router to factory defaults Tools SettingsTo backup your router configuration Backup and restore your router configuration settingsTo restore your router configuration Upgrade your router firmware Please note the followingTools Restart Check connectivity using the router managementRestart your router Tools Ping TestStatus Device Information Wireless InformationCheck the router system information Click on Status and click on Device InformationStatus Log Wired LAN InformationView your router log Router Log NavigationSend router logs to your e-mail address Configure your router logStatus Log Setting Send router logs to an external log serverView your router packet statistics View wireless devices connected to your routerStatus Wireless Set the types or categories to include in loggingManagement Capture Packets Capture packets using the router managementEnable Snmp on your router Click on Management and click on Capture PacketsRouter Management Page Structure Technical Specifications Troubleshooting Then click Obtain an IP address automatically and click OKHow to find your IP address? AppendixHow to find your MAC address? Apple Menu System Preferences NetworkRoHS Federal Communication Commission Interference StatementFCC Radiation Exposure Statement Europe EU Declaration of ConformityTEW-731BR Limited Warranty