TRENDnet TEW731BR manual Configure your router log, Status Log Setting

Page 50

TRENDnet User’s Guide

Configure your router log

Status > Log Setting

You may want send your router log to your e-mail address or to an external log server (also known as Sysco server) so you can check it periodically while away from home. You may also want to only see specific categories of logging.

Send router logs to your e-mail address

1.Log into your router management page (see “Access your router management page” on page 27).

2.Click on Status and click on Log Setting.

3.Review the e-mail log settings.

SMTP Authentication – Set this option to Enabled if your e-mail service requires authentication. If not, leave this setting to Disabled.

Note: If you are unsure of this setting check with your e-mail service provider if authentication is required.

SMTP Account – Enter your account user name for your e-mail service.

SMTP Password – Enter your password for your e-mail service.

SMTP Server – Enter the IP address (e.g. 10.10.10.10) or domain name (e.g. mail.trendnet.com) of your e-mail server.

SMTP Server Port – Enter the port used by your e-mail service. (e.g. Default SMTP Server Port: 25)

From Email Address – Enter a sender e-mail address. (e.g. router@trendnet.com)

Note: This does not need to be real e-mail address, only used for identification purposes when checking your e-mail.

To Email Address – Enter your e-mail address.

TEW-731BR

Email Log Now – Click this option to send an e-mail with the current router log using your email settings.

Email Logs – Select when you want the router log to be e-mailed.

oWhen log is full – The router log will be e-mailed to your e-mail address when router internal log is full.

oClick the drop-down list and configure to e-mail logs according to a set schedule. Once on a specific day of the week or once every day.

4. To save changes, click Apply.

Send router logs to an external log server

1.Log into your router management page (see “Access your router management page” on page 27).

© Copyright 2012 TRENDnet. All Rights Reserved.

47

Image 50
Contents Page Contents Table of Contents Product Overview Package ContentsFeatures Product Hardware Features Rear ViewFront View Application Diagram Side ViewHow to setup your router Basic Router SetupHow to set up a home network Where to find more helpRouter Installation Hardware Installation Setup Wizard Wireless LAN Select Enable for Wireless LAN Click Restart and wait for your router to reboot Connect additional wired devices to your network Wireless Networking and Security Wireless Encryption TypesSecure your wireless network Selecting WPA, WPA-Auto, or WPA2 WPA2 recommended Selecting WEPKey Then from the PSK/EAP row, select either PSK or EAPConnect wireless devices to your router Recommended Hardware Push Button PBC Method Connect wireless devices using WPSWireless WiFi Protected Setup PBC Software/Virtual Push ButtonPIN Personal Identification Number Basic wireless settings Wireless BasicSsid Broadcast Steps to improve wireless connectivity Advanced wireless settings Wireless AdvancedAccess Filter Access Control FiltersAccess control basics Access Filter MAC FiltersAccess Filter Domain/URL Blocking Domain/URL FiltersAccess Filter Protocol/IP Filters Protocol/IP filtersAccess Firewall Rule Firewall rulesTEW-731BR Change your router login password Advanced Router SetupAccess your router management Main PasswordMain Time Manually configure your Internet connectionSet your router date and time Main WANClone a MAC address Main LAN & Dhcp Server Set up the Dhcp server on your routerChange your router IP address Set up Dhcp reservation Management Remote Management Enable/disable UPnP on your routerAllow/deny VPN connections through your router Click on Management, and click on Remote ManagementMain Dynamic DNS Allow/deny multicast streamingIdentify your network on the Internet Open a device on your network to the Internet Allow remote access to your router managementAccess DMZ Access Virtual Server Virtual ServerExample To forward TCP port 80 to your IP camera Access Special AP Special ApplicationsAdd static routes to your router Routing StaticEnable dynamic routing on your router Routing DynamicTEW-731BR Router Default Settings Router Maintenance & MonitoringReset your router to factory defaults Tools SettingsTo restore your router configuration Backup and restore your router configuration settingsTo backup your router configuration Upgrade your router firmware Please note the followingTools Restart Check connectivity using the router managementRestart your router Tools Ping TestStatus Device Information Wireless InformationCheck the router system information Click on Status and click on Device InformationStatus Log Wired LAN InformationView your router log Router Log NavigationSend router logs to your e-mail address Configure your router logStatus Log Setting Send router logs to an external log serverView your router packet statistics View wireless devices connected to your routerStatus Wireless Set the types or categories to include in loggingManagement Capture Packets Capture packets using the router managementEnable Snmp on your router Click on Management and click on Capture PacketsRouter Management Page Structure Technical Specifications Troubleshooting Then click Obtain an IP address automatically and click OKHow to find your IP address? AppendixHow to find your MAC address? Apple Menu System Preferences NetworkRoHS Federal Communication Commission Interference StatementFCC Radiation Exposure Statement Europe EU Declaration of ConformityTEW-731BR Limited Warranty