TRENDnet TPL306E2K manual TRENDnet User’s Guide, TPL-306E / TPL-306E2K

Page 23

TRENDnet User’s Guide

4. Launch the Powerline Utility by double-clicking the icon.

5.The device should appear in the Main window of the utility under Local Device. Click Upgrade Firmware.

TPL-306E / TPL-306E2K

6.Click Browse next to the PIB field and navigate to the unzipped folder with the firmware files. Select the PIB file. (Ex. TPL-401E-PIB-v50100.pib)

7.Click Browse next to the NVM field and navigate to the unzipped folder with the firmware files. Select the NVM file. (Ex. TPL-401E-NVM-v5.0.1-0-0-X-FINAL.nvm)

8.Click OK.

Wait until the firmware upload completed and the device reboot

Important! Do not turn off the device or press the reset button while this procedure is in progress.

Image 23

Contents Cover Page TRENDnet User’s GuideTechnical Specifications Table of ContentsInstalling your Powerline Adapters Using the Powerline UtilityTPL-306E / TPL-306E2K TPL-306ETPL-306E2K Package ContentsFeatures Product OverviewPowerline PL LED Product Hardware FeaturesPower PWR LED Reset ButtonDefinition ResetColor SequenceErp EuP Operation Standby Mode Application DiagramConnect a Powerline adapter to your router Installing your Powerline AdaptersBefore you Install TPL-306E / TPL-306E2K To extend your network using an additional Powerline adapterAdd adapters to your network Change your default encryption key using the Sync button Securing your Powerline NetworkUsing the Sync button Add adapters using the Sync button To change the default encryption key between two Powerline adaptersSupported Operating Systems Using the Powerline UtilityPowerline Utility System Requirements Before installing and using the utility, please ensure the followingSoftware Installation 10. After the process is completed, click Finish 9. Wait for the WinPcap installation to complete7. In the License Agreement window, click I Agree 14. In the Confirm Installation window, click Next 13. In the Select Installation Folder window, click NextTPL-306E / TPL-306E2K Using the UtilityBefore using the utility, please ensure the following Start Programs or All Programs TRENDnet TRENDnet Powerline UtilityUpgrade Firmware Powerline Utility OverviewDevice Name Device Password Enter PasswordSet Local Device Only Use Default Public NetworkEncryption Key Unknown Networkname will be displayedSave Report System InformationRemote Device History Log DeleteAutoScan Add adapters in the utility and create a customized encryption key Location of Powerline AdapterDevice Password DPW 4. Click Enter PasswordTo create a customized encryption key To rename the Powerline adapters 4. Launch the Powerline Utility by double-clicking the icon Weight Technical SpecificationsOverlapping Powerline Dimension L x W X HTroubleshooting Appendix Overlapping Powerline networksEurope - EU Declaration of Conformity Federal Communication Commission Interference StatementIMPORTANT NOTE FCC Radiation Exposure Statement RoHSČesky Czech Dansk Danish Limited Warranty Limited Warranty