Xantrex Technology XPD 7.5-67, XPD 60-9, XPD 120-4.5, XPD 33-16, XPD 18-30 manual Functional Tests

Page 31

Section 2. Installation

Functional Tests

Functional Tests

Power-on

Check

Voltage Mode

Operation

Check

Current Mode

Operation

Check

These functional test procedures include power-on and front panel function checks as well as voltage and current mode operation checks.

1.Ensure that the front panel power switch is in the extended (OFF) position and the voltage and current controls are in their fully counter-clockwise positions.

2.Ensure that the AC line voltage is within operating range.

3.Plug the line cord into a grounded AC outlet.

4.Push the power switch to turn on the power supply.

After a short power-on delay, the display and the red current mode LED lights. The meter reading remains at zero.

For more about standard operations, see “Standard Operation” on page 35.

1.Ensure that the front panel voltage and current control are turned fully counter-clockwise.

2.Set the power switch to ON.

3.Rotate the current control one half-turn clockwise. Slowly rotate the voltage control clockwise and observe the digital meter. Minimum control range should be from zero to maximum rated output. Observe the bar graph meter to see that it tracks as the voltage rises. Verify that the voltage mode indicator light is ON.

4.Set the power switch to OFF.

1.Ensure that the front panel power switch is set to OFF.

2.Rotate the voltage and current controls fully counter-clockwise.

3.Rotate the voltage control one half-turn clockwise.

4.Connect a short circuit across the output terminals. Use leads of sufficient current carrying capacity.

5.Set the power switch to ON.

6.Rotate the current control slowly clockwise. The control range should be from zero to the maximum rated output1. Also check that the current bar graph meter follows the rise in current and that the current mode indicator light is ON.

7.Set the power switch to OFF.

1.On 7.5-67 model, front panel current is limited to 30 A. Short the rear busbar terminals to test the full current range is required.

Release A

29

Page 30 Page 32
Image 31
Page 30 Page 32
Contents XPD 500 Watt Series Programmable DC Power Supply Page XPD Series How do you get service? Limited WarrantyWhat does this warranty not cover? Disclaimer Product Release Release a Information About Your Power SupplyPower Supply Safety Main Sections Who Should Use This ManualManual Revisions Power Supply Safety Markings Contents Section Local Operation Remote Description Features and OptionsFront Panel Controls 500 Watt Series Power Supply Front Panel500 Watt Power Supply Rear Panel 7.5 V and 18 Rear Panel ConnectorsOutput Busbars note polarity markings OutputAnalog Interface Programming and Monitoring J210 Connector Pin Reference Name Function Making J210 Connections WiringModels 18-30 33-16 60-9 120-4.5 Electrical SpecificationsInput Conditions Additional SpecificationsRemote Programming and Monitoring Additional CharacteristicsMechanical Specifications Environmental SpecificationsMechanical Specifications Introduction Basic Setup ProcedurePeriodic Inspection, Cleaning, and PackagingCleaning InitialReturning Power Supplies to the Manufacturer Shipping or Storage Carton Label Packaging for Shipping or StorageRack Mounting Location, Mounting, and VentilationAC Input Cord AC Input Power ConnectionFunctional Tests Power-on Check Voltage Mode Operation Current ModeAWG Load ConnectionMaking Load Connections Maximum Load Wire Length for 1 V Line DropLoads InductiveMultiple Remote Sensing Sense Wiring Operating Modes Automatic Crossover Standard OperationConstant SettingCurrent Limit Setting Supply to Operate in CI Mode Automatic Crossover Shipped Configuration Local Control ModeUsing Over Voltage Protection OVP Controlling Shutdown Function via J210 Connector Using the Shutdown FunctionMaster-Slave Tracking Using Multiple Supplies Series Operation Configuring Multiple Supplies for Parallel Operation Configuring Multiple Supplies for Split Supply Operation Common Load OVP User DiagnosticsSource. See AC Input Power Operation on Local Operation Digital RemoteProgramming Options Readback and Status IndicatorsVoltage Current Readback OTP Status FlagsRemote Operation Page Xantrex Technology Inc

XPD 18-30, XPD 33-16, XPD 120-4.5, XPD 7.5-67, XPD 60-9 specifications

Xantrex Technology, a leader in advanced power electronics, has developed a variety of high-performance power inverters and converters designed for various applications. Among their notable products are the XPD 33-16, XPD 120-4.5, XPD 60-9, XPD 18-30, and XPD 7.5-67. These models showcase distinctive features, technologies, and characteristics tailored to meet diverse energy demands.

The XPD 33-16 model is recognized for its compact design and efficient power output. Designed for small to medium-sized applications, it integrates advanced digital signal processing technology, offering seamless operation and improved reliability. With an output power of 33 amps and a voltage of 16 volts, the XPD 33-16 is particularly ideal for use in recreational vehicles, marine applications, and renewable energy systems.

Next, the XPD 120-4.5 stands out with its high output capacity and versatility. Capable of delivering 120 amps at 4.5 volts, this inverter is optimized for larger power loads, making it suitable for commercial and industrial settings. Its robust design includes features such as over-temperature protection and high-efficiency components, ensuring optimal performance under demanding conditions.

The XPD 60-9 is another impressive model known for its balance of performance and energy efficiency. With an output of 60 amps and a voltage of 9 volts, it is ideal for applications requiring medium power levels. The unit is equipped with advanced monitoring capabilities, allowing users to track performance metrics in real-time, facilitating proactive management of power consumption.

For applications requiring a lower voltage solution, the XPD 18-30 offers a suitable option. With an output of 18 amps and a voltage of 30 volts, this model is engineered for use in niche markets, including specialized lighting systems and small-scale energy storage solutions. Its compact size and lightweight design enhance portability, making it easier to position and install.

Lastly, the XPD 7.5-67 model is designed for ultra-efficient energy management. Producing 7.5 amps at 67 volts, this inverter is particularly well-suited for integration into solar energy systems where space and weight constraints are critical. It features multiple safety protocols, including short-circuit and overload protection, ensuring secure operation even in challenging environments.

In summary, Xantrex Technology’s range of XPD power products, including the XPD 33-16, XPD 120-4.5, XPD 60-9, XPD 18-30, and XPD 7.5-67, highlights the company’s commitment to innovation and performance in power electronics. Each model is equipped with unique features designed to cater to a variety of applications, underscoring Xantrex's role in advancing energy technology.
Top Page Image Contents