Xantrex Technology XPD 18-30, XPD 60-9, XPD 7.5-67 manual Shipped Configuration Local Control Mode

Page 39

Setting the

Supply to

Operate in CI

Mode

Automatic

Mode

Crossover

Section 3. Local Operation

Shipped Configuration (Local Control Mode)

4.Disconnect the shorting lead from the output terminals. The power supply will now automatically switch into current limiting mode (current regulation) as soon as the preset current level is reached.

To operate the supply in CI mode:

1.Set the current limit as described above.

2.Set the voltage control fully clockwise or to the compliance voltage of the circuit.

As soon as the supply starts operating in current mode, the red current mode LED will turn on.

The automatic crossover system allows the power supply to automatically switch operating modes in response to changing load requirements. For example, if the load current attempts to increase above the setting of the current adjust control, the unit will switch automatically from Constant Voltage to Constant Current mode. If you lower the load requirements, the supply will automatically return to Constant Voltage mode.

Shipped Configuration (Local Control Mode)

The factory ships units already configured for local control (front panel) operation. See Table for a summary of this configuration.

Table 3.1 Shipped Configuration (Local Control Mode)

Local Control Configuration

Additional References

Use the front panel controls to adjust

See Section for front panel operation.

output voltage and current limit

See Section 4, page 49, for remote

settings.

analog programming procedures.

 

 

The OVP set point is adjusted at the

See “Using Over Voltage Protection

front panel to over 110% of rated

(OVP)” on page 38, for the

output voltage.

adjustment procedure.

 

 

Release A

37

Page 38 Page 40
Image 39
Page 38 Page 40
Contents XPD 500 Watt Series Programmable DC Power Supply Page XPD Series How do you get service? Limited WarrantyWhat does this warranty not cover? Disclaimer Product Release Release a Information About Your Power SupplyPower Supply Safety Who Should Use This Manual Main SectionsManual Revisions Power Supply Safety Markings Contents Section Local Operation Remote Description Features and OptionsFront Panel Controls 500 Watt Series Power Supply Front Panel500 Watt Power Supply Rear Panel 7.5 V and 18 Rear Panel ConnectorsOutput Busbars note polarity markings OutputAnalog Interface Programming and Monitoring J210 Connector Pin Reference Name Function Making J210 Connections WiringModels 18-30 33-16 60-9 120-4.5 Electrical SpecificationsInput Conditions Additional SpecificationsRemote Programming and Monitoring Additional CharacteristicsMechanical Specifications Environmental SpecificationsMechanical Specifications Introduction Basic Setup ProcedurePeriodic Inspection, Cleaning, and PackagingCleaning InitialReturning Power Supplies to the Manufacturer Shipping or Storage Carton Label Packaging for Shipping or StorageRack Mounting Location, Mounting, and VentilationAC Input Cord AC Input Power ConnectionFunctional Tests Power-on Check Voltage Mode Operation Current ModeAWG Load ConnectionMaking Load Connections Maximum Load Wire Length for 1 V Line DropInductive LoadsMultiple Remote Sensing Sense Wiring Operating Modes Automatic Crossover Standard OperationSetting ConstantCurrent Limit Setting Supply to Operate in CI Mode Automatic Crossover Shipped Configuration Local Control ModeUsing Over Voltage Protection OVP Using the Shutdown Function Controlling Shutdown Function via J210 ConnectorMaster-Slave Tracking Using Multiple Supplies Series Operation Configuring Multiple Supplies for Parallel Operation Configuring Multiple Supplies for Split Supply Operation Common Load OVP User DiagnosticsSource. See AC Input Power Operation on Local Operation Remote DigitalProgramming Readback and Status Indicators OptionsVoltage Current Readback OTP Status FlagsRemote Operation Page Xantrex Technology Inc

XPD 18-30, XPD 33-16, XPD 120-4.5, XPD 7.5-67, XPD 60-9 specifications

Xantrex Technology, a leader in advanced power electronics, has developed a variety of high-performance power inverters and converters designed for various applications. Among their notable products are the XPD 33-16, XPD 120-4.5, XPD 60-9, XPD 18-30, and XPD 7.5-67. These models showcase distinctive features, technologies, and characteristics tailored to meet diverse energy demands.

The XPD 33-16 model is recognized for its compact design and efficient power output. Designed for small to medium-sized applications, it integrates advanced digital signal processing technology, offering seamless operation and improved reliability. With an output power of 33 amps and a voltage of 16 volts, the XPD 33-16 is particularly ideal for use in recreational vehicles, marine applications, and renewable energy systems.

Next, the XPD 120-4.5 stands out with its high output capacity and versatility. Capable of delivering 120 amps at 4.5 volts, this inverter is optimized for larger power loads, making it suitable for commercial and industrial settings. Its robust design includes features such as over-temperature protection and high-efficiency components, ensuring optimal performance under demanding conditions.

The XPD 60-9 is another impressive model known for its balance of performance and energy efficiency. With an output of 60 amps and a voltage of 9 volts, it is ideal for applications requiring medium power levels. The unit is equipped with advanced monitoring capabilities, allowing users to track performance metrics in real-time, facilitating proactive management of power consumption.

For applications requiring a lower voltage solution, the XPD 18-30 offers a suitable option. With an output of 18 amps and a voltage of 30 volts, this model is engineered for use in niche markets, including specialized lighting systems and small-scale energy storage solutions. Its compact size and lightweight design enhance portability, making it easier to position and install.

Lastly, the XPD 7.5-67 model is designed for ultra-efficient energy management. Producing 7.5 amps at 67 volts, this inverter is particularly well-suited for integration into solar energy systems where space and weight constraints are critical. It features multiple safety protocols, including short-circuit and overload protection, ensuring secure operation even in challenging environments.

In summary, Xantrex Technology’s range of XPD power products, including the XPD 33-16, XPD 120-4.5, XPD 60-9, XPD 18-30, and XPD 7.5-67, highlights the company’s commitment to innovation and performance in power electronics. Each model is equipped with unique features designed to cater to a variety of applications, underscoring Xantrex's role in advancing energy technology.
Top Page Image Contents